$12.99
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The heart of any AR build is the gas system, and the ATI Outdoors Carbine Length Stainless Steel Gas Tube is the piece that carries pressure from your gas block back to the bolt carrier group. Cut to mil-spec dimensions at 9.75 inches, it's the correct length for the carbine gas system found on the majority of 10 to 18 inch barrels. If you're doing a fresh build or swapping out a tired factory tube, this is a clean, no-drama part that just works.
Stainless holds up well against the heat and corrosion that a gas tube deals with every time you send rounds downrange. The silver finish is a nice bonus if you're running stainless or naturally finished components and want everything to match. Because it's built to mil-spec, gas flow stays consistent shot to shot, which is what keeps your rifle cycling reliably whether you're plinking, running drills, or out for a day at the range.
This tube is designed to work with a low-profile gas block, so it slides under free-float handguards without any clearance headaches. Installation is straightforward for anyone comfortable with a punch and a roll pin: line up the gas port on the tube with the opening in the block, tap the pin through, and route the tube through the barrel nut and into the upper receiver. One thing worth double-checking before you order is your barrel's gas system length. Measure from the gas port to the chamber end and confirm you actually need carbine length rather than pistol, mid, or rifle. Getting the right length is what keeps your timing correct and your rifle running smooth.
ATI backs this tube with a limited lifetime warranty, which says plenty about how they expect it to hold up. For a part that takes a beating and rarely gets a second thought until something goes wrong, spending a little on a solid stainless tube is money well placed.
Carbine length gas systems are found on most AR-15 barrels in the 10 to 18 inch range. The safest way to confirm is to measure from your barrel's gas port to the chamber end and match it to the carbine spec. If your build calls for pistol, mid, or rifle length instead, you'll want the matching tube for that system.
It's made to interface with a low-profile gas block, which is the most common style on modern AR builds and slides neatly under free-float handguards. As long as your block is set up for a standard mil-spec tube, this one drops right in. Front sight base gas blocks use a differently shaped tube, so double check what your block requires.
Stainless offers strong heat and corrosion resistance and gives you that silver finish that pairs nicely with stainless or bare-metal components. Black nitride tubes handle the same job with a darker finish, so it really comes down to what look you're after and what matches the rest of your build. Both perform reliably when built to mil-spec dimensions like this one.
The tube is secured to your gas block with a roll pin, so make sure you have the correct pin on hand if your block doesn't come with one. A roll pin punch and a small hammer make the job much cleaner. Beyond that, installation is a common bench-level task for anyone building or maintaining an AR.
| UPC | 758152271730 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | A.5.10.2549 |
| Color | Silver |
| Product Type | Gas Tube |
You must be logged in to post a review.
Reviews
There are no reviews yet.