$139.99
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Zastava M92 hits hard for a little PAP-pattern pistol, and a big part of that snappy, brass-launching behavior comes down to being overgassed straight from the factory. The KNS Precision Adjustable Gas Piston System swaps in for the stock piston head and gives you a way to actually dial that energy in instead of just living with it. It threads onto the bolt carrier and lets you tune how much gas drives the action, so you can settle the gun down for a smoother, more controllable feel.
Most AK-pattern guns, the M92 included, run more gas than they strictly need to cycle. That extra pressure means more felt recoil, more muzzle rise, and more slamming of the bolt carrier back and forth. A common rule of thumb is that if your gun throws brass more than about fifteen feet, it's a strong candidate for a piston like this. Backing the gas off delivers better controllability, lighter recoil, and less wear on internal parts over the long haul.
Adjustment is tool-free and done in clicks, so you can bring it to the range and walk it in until the gun is barely, reliably ejecting, then add a few clicks back for a margin of reliability. Plenty of owners like to note their click count somewhere so they can return to it after cleaning. The piston head is built from corrosion-resistant stainless steel with a nitrided finish for low-friction, easy-cleaning operation, and it's made in the USA. The whole swap takes roughly ten minutes with no gas block removal and no permanent modification in most cases.
This is the AGP-A-4 fitment intended for the Zastava M92 PAP platform. Because AK op-rod dimensions vary from gun to gun, it's smart to measure your existing op rod against the KNS fitment chart before ordering to confirm it's a match for your specific build.
This is the AGP-A-4 model built specifically for the M92 PAP pattern. Because op-rod dimensions vary between AK builds, KNS recommends measuring your existing op rod and comparing it to their fitment chart before installing. This is especially worth doing on Frankenstein or mixed-parts builds to confirm a clean match.
A good gauge is your ejection pattern. If your gun is throwing brass more than roughly fifteen feet, that usually points to excess gas driving the carrier harder than it needs to. That extra energy shows up as heavier recoil, more muzzle rise, and faster wear, all of which this piston is designed to help dial back.
For most guns it's a straightforward job that runs about ten minutes with no gas block removal and no permanent modification. A small number of commercial-spec firearms have the piston welded to the carrier rather than riveted, and in those cases a new carrier makes for the easiest swap. Once installed, adjustment is tool-free and done in clicks at the range.
Yes, the wide range of adjustment is one of the main reasons owners choose it. You can dial the gas down for suppressed shooting to reduce blowback and gas in the face, then open it back up for standard unsuppressed use. Many owners jot down their click settings for each configuration so they can switch back and forth easily.
| UPC | 853906008218 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AGP-A-4 |
You must be logged in to post a review.
Reviews
There are no reviews yet.