$102.99
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A shotgun suppressor is only as good as the mount holding it, and that is exactly the job this adapter handles. Built by Silencer Central for the BANISH 20, this mount threads into the Crio Plus choke system on 20 gauge Benelli shotguns, taking the place of your standard choke tube and giving the suppressor a solid, properly aligned home at the muzzle. Screw it in, spin the can on, and you are ready for the field.
Benelli's Crio Plus choke threading is specific, so a generic mount is not going to cut it. This adapter is cut for that exact pattern, which means it seats correctly, torques down the way it should, and keeps the bore of the suppressor lined up with the bore of the barrel. That alignment is everything when wads and shot columns are passing through a can, and this piece is machined to keep it consistent shot after shot.
The mount is machined from 17-4 PH stainless steel, a tough, heat treatable alloy that shrugs off the abuse a shotgun muzzle sees. A black nitride finish over the top adds corrosion resistance, which matters a lot when your mornings involve wet grass, cattail sloughs, or a rainy pheasant opener. The low profile design adds very little to the end of the barrel, so the setup stays clean and balanced.
Keep in mind this mount is purpose built for the BANISH 20 suppressor and is not meant for other cans. If you run more than one shotgun with your BANISH 20, extra mounts are the smart play. Leave an adapter in each barrel and you can move the suppressor between guns in seconds instead of swapping hardware in the field. For upland hunters and duck blind regulars running a 20 gauge Benelli, this is the connection piece that makes the whole suppressed shotgun setup work.
No, this mount is purpose built for the BANISH 20 suppressor only. Silencer Central designs each choke mount specifically around the threading of its matching can, so it will not work with other suppressor models. If you run a different BANISH shotgun suppressor, grab the mount made for that model instead.
It threads into the barrel exactly like a standard Crio Plus choke tube. Remove your existing choke, thread the mount in and snug it down, then spin the BANISH 20 suppressor onto the mount. No gunsmithing or barrel modification is required.
Yes, but the choke work happens at the suppressor rather than the barrel. The BANISH 20 uses its own screw-in choke tubes at the front of the can, so this adapter simply handles the barrel connection while the suppressor's chokes control your pattern. The BANISH 20 ships with Improved Cylinder, Modified, and Full chokes.
If you plan on running the BANISH 20 on multiple shotguns, extra mounts make life a lot easier. Keep an adapter installed in each compatible barrel and you can move the suppressor from gun to gun in seconds. Just make sure each mount matches that shotgun's choke system, since this one fits the Benelli Crio Plus pattern in 20 gauge.
| UPC | 810171227348 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000350183 |
You must be logged in to post a review.
Reviews
There are no reviews yet.