$119.00
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Banish 12 mounts to your shotgun through the choke threads instead of the muzzle, and that means you need the right adapter for your barrel. This one is cut for the Remington Pro Bore pattern, the overbored choke system found on guns like the Versa Max and other Pro Bore-equipped Remingtons. It threads into the barrel just like a choke tube, then the suppressor hand-threads onto the adapter. No wrenches, no fuss, and swapping the can between guns takes about a minute if you keep an adapter in each one.
Banish machines these mounts from 17-4 PH stainless steel, which is the same tough, heat-treatable alloy you'll find in quality muzzle devices. A black nitride finish keeps corrosion at bay through wet duck blinds and muddy spring turkey woods, and it blends in with the look of the suppressor itself. At roughly 2.8 ounces, you won't notice it hanging off the end of your barrel, and the low-profile design only extends about 0.90 inches past the muzzle, so your overall setup stays as compact as a suppressed shotgun can be.
One thing worth double checking before you order: this mount fits the Banish 12 suppressor only, and it fits Pro Bore choke threads only. Remington used a couple of different choke systems over the years, and the standard Rem Choke pattern on most 870s is not the same thread as Pro Bore. If your barrel takes Pro Bore chokes, this is your adapter. Since it replaces your choke tube at the barrel, you still get pattern control through the Banish 12's own choke tubes, which thread into the front of the suppressor. Solid, simple, and it does exactly one job well.
No, these choke mounts are built exclusively for the Banish 12 shotgun suppressor. They won't fit other Banish cans or suppressors from other brands. If you run a different suppressor, you'll need the mount designed for that specific model.
No, and this trips people up. Pro Bore is Remington's overbored choke system found on guns like the Versa Max, and it uses a different, larger thread pattern than the Rem Choke system on most 870s. Check which choke tubes your barrel takes before ordering, because Banish makes a separate adapter for Rem Choke barrels.
Yes, just not in the barrel. The adapter takes the place of your choke tube, and pattern control moves to the front of the suppressor, where the Banish 12's dedicated choke tubes thread in. The suppressor ships with improved cylinder, modified, and full chokes, with additional constrictions sold separately.
Nothing special. The adapter threads into your barrel's choke threads the same way a choke tube does, and the Banish 12 hand-threads onto the adapter from there. It's quick enough that plenty of folks buy an adapter for each shotgun and move one suppressor between them.
| UPC | 810171227423 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000350031 |
| Color | BANISH 12 ADAPTER |
| Length | 4.9500 |
| Model | |
| Package Height | 1.0 |
| Package Width | 5.0 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.15 |
You must be logged in to post a review.
Reviews
There are no reviews yet.