$102.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Banish 12 is one of the more clever pieces of shotgun gear to come along in years, but it needs the right mount to get on your gun. That is exactly what this adapter handles. It threads into the choke tube threads on Browning Invector DS barrels, giving your Banish 12 suppressor a solid, properly aligned mounting point on guns like the Citori 725, A5, and Maxus II. The suppressor slides over the mount and locks down with its threaded collar, so you can rotate the body to keep your bead and rib completely clear before snugging it up.
Silencer Central machines these from 17-4 PH stainless steel and coats them in black nitride, which shrugs off corrosion from wet duck blinds and powder fouling alike. The whole thing weighs around 2.8 ounces and sticks out roughly 0.90 inches past the muzzle, so it barely changes how your gun carries or swings. Installation works just like swapping a choke: pull your existing tube, thread the mount in, and torque it with the Banish multi-wrench. From there, mounting and removing the suppressor takes seconds.
Here is where extra mounts earn their keep. If you run one Banish 12 across several guns, keeping a dedicated mount installed in each barrel means the suppressor moves between them without any wrench work at the muzzle. Leave this one in your A5 for the timber, another in your Citori for clays, and just carry the can back and forth.
Double-check the marking on your barrel before ordering. Invector DS is Browning's newer double-seal choke system and it does not interchange with Invector Plus or Standard Invector threads, so a mount for one will not fit the other. If your barrel reads Invector DS, this is the one you want. Your pattern control does not go anywhere either, since the Banish 12's own choke tubes thread into the front of the suppressor.
It fits Browning 12 gauge shotguns with Invector DS choke threads, which includes newer models like the Citori 725, A5, and Maxus II. The easiest way to confirm is to check the marking on your barrel. If it says Invector Plus or Standard Invector instead, you need a different mount, since those thread systems do not interchange with Invector DS.
Yes, just not your barrel's chokes. This mount takes the place of your choke tube in the barrel, and the Banish 12 suppressor uses its own dedicated chokes that thread into the front of the can. The suppressor ships with Improved Cylinder, Modified, and Full, with additional constrictions sold separately, so you keep full pattern control.
The mount threads into your barrel just like a choke tube and gets torqued with the Banish multi-wrench. The suppressor then slides over the mount and locks in place with a threaded collar, and you can rotate the body so it sits below your sightline before tightening. Once the mount is installed, putting the can on and off takes just a few seconds.
Extra mounts let you run one suppressor across multiple shotguns without swapping hardware at the muzzle every time. Keep a mount installed in each gun, and the Banish 12 moves between them as fast as you can thread the collar. It is a popular setup for folks who split time between a waterfowl autoloader and a clays gun.
| UPC | 810171223630 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000350116 |
You must be logged in to post a review.
Reviews
There are no reviews yet.