$114.99
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Banish 12 is a great shotgun suppressor, but it only works as well as its mount. That is where this adapter comes in. It threads directly into the choke tube threads on shotguns cut for the Benelli CRIO pattern, giving the Banish 12 a dedicated, secure interface on your barrel. Once the adapter is seated, the suppressor hand-threads on with minimal effort, so swapping the can between the blind and the truck takes seconds rather than a trip to the workbench.
Banish machines these adapters from 17-4 PH stainless steel, the same hard-wearing alloy you will find in quality barrel components, then finishes them in black nitride for corrosion resistance and a clean, low-profile look. That matters on a part that lives at the muzzle of a duck gun, where powder fouling, rain, and marsh water are just part of the job. At 4.9 inches long and only a couple ounces, it adds almost nothing to the front end of your shotgun.
Since the adapter takes the place of your choke tube, you are not giving up pattern control. The Banish 12 uses its own set of choke tubes that thread into the suppressor itself, so constriction happens downstream of the mount. The adapter's job is simply to keep everything concentric and aligned with the bore, which is exactly what you want for consistent patterns and a repeatable point of impact. As with any choke and load combo, spend some time on the pattern board before the season opens.
If your shotgun wears CRIO pattern chokes, this is the mount you need to run the Banish 12 on it. It is a smart pickup for anyone splitting one suppressor across multiple shotguns, since a spare adapter in each barrel means the can moves between guns without any fuss. Just note this mount is made specifically for the Banish 12 and is not a universal suppressor adapter.
No, this mount is purpose-built for the Banish 12 suppressor and is not compatible with other cans. If you run a different suppressor, you will need the mounting hardware made for that system. For the Banish 12, though, this is the correct piece for CRIO threaded barrels.
Yes, just not in the barrel. The adapter takes the spot where your choke tube normally sits, and the Banish 12 suppressor accepts its own choke tubes that thread into the can itself. That means you keep pattern control, it just happens at the suppressor instead of the muzzle.
The CRIO thread pattern shows up across much of Benelli's lineup, including popular waterfowl and field guns like the Super Black Eagle series and M2. The easiest way to confirm is to check which choke tubes your barrel takes. If it runs CRIO pattern chokes, this adapter is the right fit.
The adapter threads into your barrel's choke threads just like a choke tube, then the suppressor hand-threads onto the adapter. No special tools are needed for mounting the can, which makes it quick to move the Banish 12 between shotguns if you keep an adapter in each barrel.
| UPC | 810171227362 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000350025 |
| Caliber/Gauge | 12 Gauge |
| Color | BANISH 12 ADAPTER |
| Length | 6.70" |
| Model | |
| Package Height | 1.0 |
| Package Width | 5.0 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.15 |
You must be logged in to post a review.
Reviews
There are no reviews yet.