$102.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you picked up a BANISH 12 and want to run it on your Mossberg, this is the piece that makes it happen. The adapter threads directly into the Accu-Choke threads on your barrel, taking the place of your choke tube and giving the suppressor a solid, true mounting point. From there the can hand-threads right on, so swapping it between shotguns at the truck or in the blind takes seconds and no tools.
Banish machines these mounts from 17-4 PH stainless steel, which is the right call for a part that lives at the muzzle of a 12 gauge and eats recoil, heat, and powder fouling all season. A black nitride finish adds corrosion resistance, which matters when your shotgun spends mornings in flooded timber or a wet duck boat. Despite the strength, it stays light at roughly 2.8 ounces and extends only about nine tenths of an inch past the barrel, so it adds almost nothing to your gun's overall length or swing.
A fair question is what happens to your choke when the adapter takes its spot in the barrel. The answer is nothing bad. The BANISH 12 system moves choke duty to the front of the suppressor itself, where the included improved cylinder, modified, and full tubes thread in. You still control your pattern, you just do it at the end of the can instead of the end of the barrel.
Because the adapter matches the Accu-Choke thread pattern, it works across the popular Mossberg lineup with threaded barrels, including the 500, 535, 930, and 940 families plus the Maverick 88. Keep one adapter in each gun and move a single suppressor between them, or dedicate this one to your favorite duck gun. Just note this mount is made specifically for the BANISH 12 and is not a universal suppressor adapter.
It fits any Mossberg 12 gauge barrel threaded for the Accu-Choke system, which covers popular models like the 500, 535, 930, 940, and the Maverick 88. If your barrel takes standard Accu-Choke tubes, this adapter threads right in where your choke normally sits.
No, this mount is purpose-built for the BANISH 12 shotgun suppressor and is not compatible with other cans. If you run a different suppressor, you'll need the mount designed for that specific system.
Yes. The adapter replaces the choke tube in your barrel, but the BANISH 12 suppressor accepts its own choke tubes at the front of the can, including the improved cylinder, modified, and full tubes that ship with the suppressor. You keep full control over your pattern while shooting suppressed.
The adapter installs into your barrel's choke threads just like a choke tube, and a standard choke wrench makes it easy to snug it down properly. Once it's in place, the BANISH 12 hand-threads onto the mount, so moving the suppressor between shotguns is quick and tool-free.
| UPC | 810171227409 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100000350029 |
| Caliber/Gauge | 12 Gauge |
| Color | BANISH 12 ADAPTER |
| Length | 5 |
| Model | |
| Package Height | 2.0 |
| Package Width | 5.0 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.2 |
You must be logged in to post a review.
Reviews
There are no reviews yet.