Description
Accura's Precision-Bond handgun bullets are a copper-plated .38 caliber projectile sized at .358" and weighing 125 grains in a flat point profile. Accura starts with certified lead and copper, extrudes the lead into wire, and swages it into a core before running it through a proprietary plating bath that leaves a tough, uniform copper skin. A final sizing die squares everything up, so what lands in your box is a batch of bullets that drop into your dies and shoot the same from the first round to the last. The flat point nose punches clean holes in paper and feeds smoothly in revolvers and lever guns chambered for .38 Special and .357 Magnum.
What the Accura .38 125 gr Flat Point Brings to the Bench
This bullet is rated for a maximum velocity of 1,300 fps, which gives you plenty of room to work up a snappy .38 Special load or dial in a lighter, faster .357 Magnum plinker. The 125 grain weight runs noticeably softer on recoil than the classic 158 grain loads, making it a favorite for long range days and new revolver owners finding their groove. Accura recommends seating to the cannelure for a consistent crimp and overall length.
Loading the Precision-Bond 125 gr Copper-Plated Bullet
Plated bullets like these sit between bare lead and full jacketed when it comes to load data. The common approach is to use lead or mid-range jacketed data for a 125 grain projectile and work up carefully while staying under that 1,300 fps ceiling. Go easy on the crimp so you don't cut through the plating, and you'll get the clean-burning, low-fouling range sessions these bullets are known for.
Keep in mind this is a component bullet for reloading, not loaded ammunition. You'll need your own brass, primers, and powder to build a finished cartridge.
Key Specifications
- Manufacturer: Accura Bullets
- Manufacturer Part Number: 38125FPWC
- UPC: 850059007174
- Caliber: .38 cal (.357/.38 Special, .357 Magnum)
- Bullet Diameter: .358"
- Bullet Weight: 125 grain
- Bullet Profile: Flat Point (FP)
- Construction: Swaged lead core, copper-plated (Precision-Bond)
- Maximum Velocity: 1,300 fps
- Recommended C.O.L.: Seat to cannelure
- Quantity: 500 count box
- Product Type: Reloading component bullet (not loaded ammunition)
What’s Included
- 500 count box of Accura Precision-Bond .38 cal .358" 125 gr flat point copper-plated bullets
Frequently Asked Questions
Are the Accura Precision-Bond .38 125 gr bullets loaded ammunition?
No, these are component bullets intended for handloading, not finished cartridges. You'll supply your own brass, primers, and powder to assemble a complete round. They work with standard single-stage or progressive reloading presses set up for .38 Special or .357 Magnum.
What load data should I use for these copper-plated 125 grain bullets?
Plated bullets fall between bare lead and jacketed, so most reloaders start with lead or mid-range jacketed 125 grain data and work up slowly. Keep your velocity under the 1,300 fps rating and use a light to moderate crimp so you don't cut into the plating. Always cross-check with your powder manufacturer's current published data.
Will these .358" bullets work in both .38 Special and .357 Magnum?
Yes, the .358" diameter and 125 grain flat point profile are standard for both the .38 Special and .357 Magnum, since they share the same bullet diameter. The 125 grain weight makes a soft-recoiling .38 Special practice load or a lighter, faster .357 Magnum round. Accura recommends seating to the cannelure for a consistent crimp.
How does the 125 grain flat point compare to a 158 grain bullet?
The 125 grain runs faster and kicks noticeably less than the classic 158 grain, which makes it easy on the wrist during long range sessions. The flat point nose cuts clean, well-defined holes in paper targets for easier scoring. It's a solid pick for new revolver shooters and high-volume practice alike.




Reviews
There are no reviews yet.