Description
The Accu-Tac SR-5 G2 is one of those pieces of gear you notice the difference with on your very first shot. Machined from 100% billet 6061-T6 aircraft-grade aluminum right here in the USA, it carries a Type III MIL-SPEC hard-anodized finish that shrugs off scrapes and rough handling. The wide, planted stance kills the wobble you get from lighter bipods, and once it is set up you get that rock-solid feel that makes follow-up shots and repeatable groups a whole lot easier.
What Makes the SR-5 G2 Adjust So Fast
Each leg runs on a ratcheted, spring-loaded design that you deploy or retract by simply pulling downward, and a one-button retraction lever snaps everything back when you are done. The legs give you nine notch height settings running from 6.25 inches up to 10.75 inches at the 90-degree position, and they lock into four different leg-angle positions across a 180-degree arc. Because each leg adjusts independently, you can level the rifle on rocks, roots, or a sloped berm without fighting the terrain.
Canting and Quick-Detach on the SR-5 G2
The cant feature lets you roll the rifle to level your reticle on uneven ground, and it locks down tight with the throw lever so nothing drifts mid-string. The quick-detach clamp grabs a standard 1913 Picatinny rail and cinches down secure in seconds, no extra tools required, which makes it painless to move between rifles or pull it off for transport.
Where the Accu-Tac SR-5 G2 Earns Its Keep
This one fits tactical builds, precision rimfire, hunting rifles, and airgun setups equally well. Folks who run it consistently point to how little movement there is once it is planted, and that stability is what keeps them coming back. If you want a bipod that stays put and takes abuse without complaint, the SR-5 G2 is a serious contender.
Key Specifications
- Manufacturer: Accu-Tac
- Model: SR-5 G2
- Manufacturer Part Number: SRB-G200
- UPC: 858520006237
- Mount Type: Quick-Detach 1913 Picatinny Rail
- Material: 100% Billet 6061-T6 Aluminum with Steel Hardware
- Finish: Type III MIL-SPEC Hard Anodize, Flat Black
- Height Range (90 degrees): 8.0 in to 10.75 in
- Minimum Height (45 degrees): 6.25 in
- Height Settings: 9 notch positions
- Leg Angle Positions: 4 positions across 180-degree arc
- Maximum Stance (90 degrees): 15.75 in
- Closed Length: 9.0 in
- Closed Width: 3.25 in
- Weight: 22 oz
- Cant: Yes, throw lever lock
What’s Included
- Accu-Tac SR-5 G2 Bipod with Picatinny quick-detach mount
Frequently Asked Questions
What does the Accu-Tac SR-5 G2 mount to?
It attaches to any standard 1913 Picatinny rail using its quick-detach clamp. The clamp cinches down secure in seconds and does not need any extra tools to tighten. If your rifle has an M-LOK or KeyMod handguard, you will want a short Picatinny rail section to give the bipod something to clamp onto.
How many height positions does the SR-5 G2 have?
The legs give you nine notch height settings, running from 6.25 inches at the 45-degree angle up to 10.75 inches at the 90-degree position. Each leg adjusts independently, so you can level the rifle on uneven terrain without matching them up perfectly.
Does the Accu-Tac SR-5 G2 have cant and how do you lock it?
Yes, the SR-5 G2 cants so you can level your reticle on sloped or rough ground. The cant locks down with a throw lever that gives you a quick, positive hold. Keep in mind the lever is meant to be set by hand and repositioned as needed rather than cranked with a tool.
Is the SR-5 G2 good for rimfire and airgun rifles?
It works great for precision rimfire and airgun setups, along with tactical and hunting builds. The wide stance and billet aluminum construction give you a stable, low-movement platform that helps with repeatable groups. The 22-ounce weight adds enough mass to settle the gun without feeling bulky.






Reviews
There are no reviews yet.