$22.00
64 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Thread pitch mismatches are one of those small headaches that can stop a suppressor setup dead in its tracks. The AB Suppressor Raptor Muzzle Thread Adapter clears that up by converting a 1/2×28 muzzle thread over to 5/8×24, so a can or muzzle device built for the larger pitch will spin right onto a host that came from the factory with the smaller thread. It is a straightforward mechanical conversion piece that does not touch bore dimensions or change how the firearm functions.
The real value here is versatility. If you have got a 7.62 suppressor or a 5/8×24 device you want to run on more than one platform, this adapter lets a single can serve multiple rifles instead of buying dedicated hardware for each one. It is a budget-friendly way to bridge two of the most common thread standards out there, and at roughly 1.4 ounces it adds barely anything to the front of your rifle.
AB Suppressor machines each Raptor adapter from 17-4 PH stainless steel, a precipitation-hardened alloy that shrugs off wear, heat, and corrosion under repeated use. What matters most for a thread adapter is concentricity, and that is where the manufacturing approach pays off. Every mating surface is cut in a single operation, which helps keep the suppressor sitting true and in-line with the bore rather than introducing any slop or misalignment at the muzzle.
Installation is about as simple as it gets. With the firearm safely unloaded and pointed downrange, the female 1/2×28 end threads onto your barrel, and your 5/8×24 can or device threads onto the exposed 5/8×24 side. It is designed to fit the AB Suppressor Raptor series along with other standard 5/8×24 threaded muzzle devices, making it a handy piece to keep in the range bag for anyone juggling a few different hosts.
It converts a 1/2×28 muzzle thread over to 5/8×24. The female 1/2×28 end threads onto your barrel, leaving a 5/8×24 male thread exposed for your suppressor or muzzle device. This lets a 5/8×24 can run on a host that came with the smaller 1/2×28 pitch.
That is the goal of the design. Every mating surface on the adapter is machined in a single operation, which helps maintain concentricity so the can sits true and in-line with the bore. Consistent alignment matters for both accuracy and even wear on the suppressor.
It is machined from 17-4 PH stainless steel, a hardened alloy chosen for strength, heat tolerance, and corrosion resistance. It tips the scale at about 1.4 ounces, so it adds very little mass to the front of your rifle.
It is built to fit the AB Suppressor Raptor series, but since it presents a standard 5/8×24 thread on the output side, it will also work with other 5/8×24 threaded suppressors and muzzle devices. Always confirm your specific can's mounting requirements before running it.
| UPC | 679065311323 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TA-1/2-28 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.