$1,000.00
9 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Most 30 cal suppressors force a trade between sound performance and added length. The AB Raptor 10 gets around that with its Reflex mounting system, which extends the can back over the barrel itself. This configuration ships with a 5 inch bull barrel Reflex mount in 5/8×24, so a big chunk of the suppressor's volume sits over your barrel instead of hanging out past the muzzle. You get the suppression of a full 10-stack can while your rifle stays close to its original handling length.
Instead of conical baffles that try to stop expanding gases head-on, AB's spiral design peels gas off the bore and sends it into a spin, burning off energy as it travels through the can. The result is a lower, smoother tone at the ear and less blowback coming back through the action, something you will appreciate on gas guns especially. The 10-stack is the longest baffle count in the Raptor lineup, so this is the configuration to pick when sound performance matters more than counting ounces. That said, ounces are barely a factor here anyway.
Every spiral, the blast chamber, the end cap, and the mounts are machined from Grade 5 titanium, and the fully welded tubeless construction keeps the whole package at 9.5 ounces with a 1.625 inch diameter and 7.2 inch length. The Jet Black high-temp Cerakote finish handles heat and hard use without complaint, and the can is full auto rated for good measure.
Out of the box you can run the included 5 inch Reflex mount or swap to the included flush mount end cap for a conventional direct thread setup, both in 5/8×24. If you already have a collection of QD muzzle devices, the optional Raptor Adapter converts the base threads to the 1.375×24 HUB standard, opening the door to most popular mounting systems. Rated from 300 Blackout up through magnum cartridges like 300 Win Mag and 300 PRC, this one can genuinely cover a whole safe full of rifles.
This can is rated for .30 caliber and under, covering everything from 300 Blackout and 7.62×39 up through 30-06, 300 Win Mag, and 300 PRC class magnums. You can also shoot smaller sub-calibers like 5.56 through it, though a dedicated smaller-bore can will squeeze out a bit more suppression for those rounds. For most people this one suppressor covers the whole rifle rack.
The Reflex mount extends the suppressor body back over your barrel, adding internal volume without adding length past the muzzle. This model includes the 5 inch bull barrel Reflex mount with 5/8×24 threads, so you need at least 5 inches of clearance behind the muzzle and a bull barrel profile. AB Suppressor offers Reflex swaps for other lengths and standard barrel profiles on new, unfired mounts if you need a different fit.
Yes, with the optional Raptor Adapter, which converts the base threads to the industry standard 1.375×24 HUB pitch. That opens up compatibility with a huge range of QD muzzle devices and mounting systems already on the market. Out of the box it runs the included Reflex mount or flush mount, both in 5/8×24.
The 10-stack is the longest baffle count in the Raptor family, adding two spiral baffles over the 8-stack for maximum suppression volume. More baffles means quieter performance, which pays off on higher pressure magnum loads. Hunters covering lots of ground sometimes go shorter to save length and weight, but at 9.5 ounces the Raptor 10 is still lighter than plenty of shorter cans from other makers.
| UPC | 679065312306 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | F22-710-BB5 |
| Caliber/Gauge | 7.62MM |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.