Description
This is the standalone full length sizing die for 9mm Luger (9×19) from Hornady, the workhorse first station of any pistol reloading setup. It takes your fired brass back down to spec and knocks out the spent primer in one stroke, getting the case ready for priming, charging, and bullet seating. Whether you're building a 9mm die bench from scratch or replacing a worn or damaged sizer, this is the exact die you want handling the heavy lifting.
What the 9mm Luger Sizing Die Brings to the Bench
The star of the show here is the titanium nitride sizing ring, Hornady's gold ring finish that's harder than carbide and doesn't require any case lubrication. For straight wall pistol brass like 9mm, that's a real time saver since you can run cases straight from the tumbler without spraying lube. The hard coating also means less friction and less wear on your cases, which stretches out the life of your brass and keeps things sticking-free through the die.
Zip Spindle Decapping That Stays Put
The decapping assembly rides on Hornady's Zip Spindle design, which uses a series of light threads so you can make fine adjustments by turning the spindle or zip it up and down quickly for bigger moves. Once it's set, it positively locks to eliminate slippage, so your decapping pin stays exactly where you put it. The internal profile is precision machined and polished to a smooth finish, so cases feed in and out without drag or hang-ups.
Fits Right Into Your 9mm Setup
Since this is the full length sizer only, it threads into any standard 7/8-14 reloading press, single stage or progressive. It uses a #8 shell holder for 9mm Luger brass. Hornady backs their dies with a reputation for lasting a lifetime of reloading, and this one is built to the same Custom Grade standard that reloaders have trusted for years. If you already run Hornady seating and crimp dies, this drops right in alongside them.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 046516
- UPC: 090255465167
- Caliber: 9mm Luger (9×19)
- Die Type: Full Length Sizing Die
- Bullet Diameter: .355 in
- Sizing Ring: Titanium Nitride (TiN) gold ring
- Spindle Design: Zip Spindle
- Shell Holder: #8
- Thread: 7/8-14
- Lubrication Required: No
- Quantity: 1 die
What’s Included
- 1 Hornady 9mm Luger full length sizing die
- Decapping assembly with pin
- Lock ring
- Instructions
Frequently Asked Questions
Does the 9mm Luger sizing die need case lube?
No. The titanium nitride gold ring is harder than carbide and lets you size straight wall 9mm brass without any lubrication. That means you can run cases right out of the tumbler and skip the lube step entirely.
Does this die deprime brass too?
Yes. It's a full length sizing die with a built-in decapping assembly, so it resizes the case and punches out the spent primer in the same stroke. That makes it the first station in your 9mm reloading process.
Is this a complete die set or just one die?
This is the single full length sizing die only, not a complete set. You'll still need a seating die and a crimp die to finish loading 9mm. If you want everything in one box, look at Hornady's 3-die 9mm sets instead.
What shell holder do I need for 9mm Luger with this die?
Hornady lists the #8 shell holder for 9mm Luger brass. It isn't included with the die, so grab one separately if you don't already have it on the bench.





Reviews
There are no reviews yet.