Description
Lee's 92205 takes the well-loved 9mm Luger Carbide Factory Crimp Die and adds a micrometer seater adapter in place of the stock adjusting screw. The result is a die that seats the bullet, crimps the case, and post-sizes the finished round all in one pass. For anyone running a progressive or turret press with limited stations, that combination frees up a toolhead spot and trims a full step out of the loading cycle.
The micrometer thimble is laser engraved and reads just like a depth micrometer, with each division marking one thousandth of an inch. That makes setting bullet seating depth genuinely repeatable, so swapping between bullet weights or going back to a known load is a matter of dialing to a number instead of trial and error. Because the die body stays put once installed, your crimp setting holds and you adjust seating from the top.
What the 9mm Carbide Factory Crimp Setup Does
The carbide ring is the heart of this design. As the round is crimped, that ring sizes the case, so even slightly bulged or mixed range brass gets squared away and chambers with factory-like reliability. On a 9mm handgun load, that taper crimp also locks the bullet firmly against setback, which matters for consistent ignition and feeding. Dead length seating means the body contacts the shell holder for uniform seating depth round after round.
Where the 92205 Fits Your Bench
This one is a natural fit for Pro 1000 and 4-hole turret owners, along with folks running a Dillon 550 or 750 who want to combine operations without giving up a dedicated crimp. The micrometer seater adapter is also sold on its own for 380 Auto, 9mm Luger, 40 S&W, and 10mm Auto if you already own the matching carbide crimp die, but the 92205 is the ready-to-run 9mm package. If you've been eyeing tighter runout and a cleaner workflow, this is a solid upgrade for pistol reloaders who load 9mm in volume.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92205
- UPC: 734307922054
- Cartridge: 9mm Luger
- Type: Micrometer Carbide Factory Crimp Die
- Crimp Style: Taper crimp with carbide post-sizing ring
- Adjustment: Micrometer, laser engraved, 0.001 inch divisions
- Seating Style: Dead length bullet seating
- Country of Manufacture: United States
What’s Included
- Lee 9mm Luger Carbide Factory Crimp Die with micrometer seater adapter installed
- Instructions
Frequently Asked Questions
Does the 92205 seat the bullet as well as crimp?
Yes. With the micrometer seater adapter installed, this die seats the bullet, applies the taper crimp, and post-sizes the finished case all in one pass. It lets you combine two operations into a single press station, which is handy when toolhead space is tight.
Will this 9mm micrometer carbide factory crimp die work on a progressive or turret press?
It's built with exactly that in mind. Lee aims this setup at Pro 1000 and 4-hole turret users along with Dillon 550 and 750 owners who want to free up a station. The die body stays put once installed, so your crimp holds while you adjust seating depth from the micrometer on top.
Do I need to trim my 9mm brass before using the carbide factory crimp die?
Case length is not critical with the Factory Crimp design, so you generally don't need to trim 9mm brass for it. The carbide ring sizes the case as it crimps, which helps mixed range brass chamber reliably without the fuss of trimming and chamfering.
Is the micrometer seater adapter available for other calibers?
Yes. Lee offers the micrometer seater adapter for cartridges including 380 Auto, 9mm Luger, 40 S&W, and 10mm Auto, with the matching carbide factory crimp die sold separately. The 92205 is the ready-to-run 9mm Luger version with the die and adapter together.




Reviews
There are no reviews yet.