Description
Pachmayr built the SC100 for the gun-down disciplines where a quick, catch-free mount matters. The medium .8" version gives you a genuine leather face over a black base in the classic Old English profile, so it looks right at home on a nice wood stock while the famous Decelerator rubber does the hard work of eating up recoil. The result is a pad that shooters swap onto sporting clays guns, skeet and trap guns, and upland hunting shotguns because it does everything well.
What Makes the SC100 Decelerator Different
The standout feature is the patented Speed Mount heel. That hard rubber top edge lets the buttstock glide up over a vest, jacket, or shirt without snagging, which is exactly what you want when you start with the gun low and need to get on the bird fast. Underneath that heel, the Decelerator material is the same recoil-reducing compound Pachmayr is known for, cushioning the shove against your shoulder and helping you stay steady for a follow-up shot.
Fitting the .8" Medium Leather Face Pad
This is a grind-to-fit pad, not a slip-on, so plan on shaping it to match your stock. The full length runs about 5.50" with a width around 1.80" at the widest point, and the .8" thickness keeps your length of pull close to stock. Most folks have a gunsmith mark it on the gun, then grind it on a disc or belt sander with a jig for a clean, flush edge. The screw holes typically get located to your stock during install, and a little masking tape while cutting helps keep the wood from splintering.
Where the SC100 Earns Its Keep
Regular clays and skeet shooters like this pad because it slides into the shoulder pocket instead of sticking as the gun comes up. That combination of smooth mounting and solid recoil absorption is why a lot of people end up putting these on every shotgun they own, from the competition gun to the one that goes to the field.
Key Specifications
- Manufacturer: Pachmayr
- Model: SC100 Decelerator Sporting Clay
- Manufacturer Part Number: 04793
- UPC: 034337047933
- Color: Black (leather face, black base)
- Size: Medium
- Thickness: .80 in
- Length: 5.50 in
- Width (widest point): 1.80 in
- Face Material: Leather
- Recoil Material: Decelerator rubber
- Profile: Old English / 752-style
- Mounting: Grind-to-fit, screw-on
- Style: Standard
What’s Included
- Pachmayr SC100 Decelerator .8" medium black leather face recoil pad (single pad)
Frequently Asked Questions
Is the Pachmayr SC100 a grind-to-fit pad or a slip-on?
It is a grind-to-fit, screw-on pad, so it needs to be shaped to match the width and height of your stock during installation. Most people have a gunsmith mark it on the gun and grind it on a disc or belt sander with a jig for a flush edge. If you want a no-tools install, a slip-on style pad would be the easier route instead.
What makes the SC100 good for sporting clays and skeet?
The patented Speed Mount heel uses a hard rubber top that lets the shotgun slide up over your vest or jacket without catching, which is ideal for gun-down disciplines. That fast, clean mount combined with the recoil-absorbing Decelerator material is exactly why it is popular for clays, skeet, and trap. It also works well for upland hunting and general target shooting.
Will the .8" medium pad change my length of pull much?
The .8" thickness is one of the thinner options in the line, so it keeps your length of pull close to what a typical factory pad gives you. Because it is grind-to-fit, the final dimensions are dialed in when it is shaped to your stock. If you need a longer pull, Pachmayr also offers this pad in a 1" thickness.
Does the SC100 come pre-slit for the screws?
The screw holes are usually located and set to your specific stock during the fitting process rather than being pre-slit from the factory. That is standard for grind-to-fit pads and lets the pad be centered exactly where it needs to sit. A gunsmith or a careful DIY install with a jig makes this straightforward.





Reviews
There are no reviews yet.