Description
Drilling and tapping a receiver for scope bases is one of those jobs where there's no room for a wandering bit. The Forster 8-40 Bushing Set drops into the Universal Sight Mounting Fixture and gives you three hardened guides sized for the 8-40 thread pattern, which is the heavier-duty screw size a lot of folks step up to for magnum rifles and hard-recoiling guns. Each bushing keeps your tooling locked on center so you get clean, straight holes without the guesswork.
What the 8-40 Bushing Set Actually Does
This set works as the sizing guide for one specific thread size. It includes three bushings marked #30 for the pre-drill pass, #28 for the final drill, and #18 to guide the tap. That step-up sequence is the whole point. You open the hole gradually and let the slip bushing keep the tap from cocking, which is exactly how taps get snapped off in a receiver when you freehand it. With the right guide in place, the tap stays square and threads cut evenly.
Pairing the 8-40 Bushings With Your Forster Fixture
Keep in mind this is a bushing set only, not the fixture itself. It's designed to work with the Forster Universal Sight Mounting Fixture (UF1000), which handles just about any bolt, lever, or pump gun by holding the barrel in true alignment with bore center. If you already own the fixture and it came with the 6-48 bushings, this is the add-on that lets you tackle 8-40 work without buying a whole new jig.
Why the 8-40 Bushing Set Earns Its Keep
Forster has been building precision reloading and gunsmithing gear in Lanark, Illinois since 1935, and this tooling reflects that. Ruin one nice receiver with an off-center hole or a broken tap and you'll wish you had the right guides. For anyone who mounts optics on their own rifles or does light gunsmithing on the side, having the 8-40 set on the bench means you're ready when a heavier mount job rolls in.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: UF1000-UB0840
- UPC: 757253006920
- Thread Size: 8-40
- Number of Bushings: 3
- Bushing Markings: #30 pre-drill, #28 drill, #18 tap
- Compatible Fixture: Forster Universal Sight Mounting Fixture (UF1000)
- Product Type: Drill jig bushing set
- Category: Gunsmithing Tools & Supplies
What’s Included
- 1 x #30 pre-drill bushing
- 1 x #28 drill bushing
- 1 x #18 tap bushing
Frequently Asked Questions
Does the 8-40 bushing set include the mounting fixture?
No, this is a bushing set only. It's an accessory that fits into the Forster Universal Sight Mounting Fixture (UF1000), which is sold separately. You'll need that fixture to put these bushings to use.
What are the three bushings in the 8-40 set marked?
The set comes with three bushings: #30 for the pre-drill, #28 for the final drill, and #18 to guide the tap. Working through them in that order opens the hole gradually and keeps the tap running straight.
Why would I use an 8-40 bushing set instead of the standard 6-48?
8-40 is a larger, stronger screw size that many people prefer for magnum rifles and heavy-recoiling guns where extra holding power matters. If your bases are drilled for 8-40 screws, this is the bushing set that matches. A lot of shooters step up to 8-40 for the added strength on optics that take a beating.
Will this work with any rifle?
The bushings themselves handle the 8-40 thread size, while the Universal Sight Mounting Fixture they pair with is built to work with virtually all bolt action, lever action, and pump guns. As long as your setup uses the Forster fixture, these bushings will guide your drilling and tapping right where you need it.





Reviews
There are no reviews yet.