Description
If you handload the 7x64mm Brenneke and you've been chasing tighter groups, a lot of your accuracy comes down to how straight your bullets seat. This Forster Ultra Micrometer Seater Die (part number U00073) is built to take the guesswork out of that step. It starts life as high-quality steel, machined to tight tolerances, then hand polished before and after heat treating for a clean, consistent finish that holds up load after load.
How the 7x64mm Brenneke Micrometer Seater Die Keeps Things Straight
The heart of this die is its floating chamber sleeve. A spring-loaded sliding chamber fully captures the case and supports the entire outside diameter of the sized brass, not just the rim or neck like a lot of competing seaters. The bullet, case, and seating stem all ride in the same close-fitting channel through the whole seating stroke, which is what keeps your loaded rounds concentric and your runout low. Reloaders who've switched over from other brands regularly report measured runout well under .001 inch, and some see it cut by more than half compared to what they were getting before.
Dialing In Seating Depth With the Micrometer Head
The micrometer top is where this die earns its keep. Graduations are marked in .001 inch increments with sharp white lettering that's easy to read and easy to record, and you can fine-tune in either direction down to around .0005 inch. Seat a round, measure it, then dial the stem to the exact length you want. Once you log your settings, coming back to a proven load is quick, which pretty much ends the old trial-and-error routine of bumping a lock ring and hoping.
Fitting It Into Your Setup
This is a non-crimping seater, so it's purely focused on alignment and precise depth rather than roll crimping. It threads into any standard press with the common 7/8-14 die thread, so it drops right into the gear you already own. Whether you're loading hunting rounds for the field or working up a precision load at the bench, this is a die that rewards careful handloading with cartridges that run true.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: U00073
- UPC: 757253006531
- Cartridge: 7x64mm Brenneke
- Die Style: Bullet Seating Die (Ultra Micrometer)
- Adjustment: Micrometer head, .001 inch graduations
- Crimping: Non-crimping
- Bullet Diameter: .284 inch (7.21 mm)
- Case Design: Bottleneck rifle case
- Material: Hand-polished, heat-treated steel
- Press Thread: Standard 7/8-14
- Country of Origin: Made in USA
- Pack Size: Single die
What’s Included
- One Forster Bench Rest Ultra Micrometer Seater Die
- One Forster split-type lock ring
- Storage case
- Instructions
Frequently Asked Questions
Does the 7x64mm Brenneke Ultra Micrometer Seater Die crimp the case?
No, this is a non-crimping seater die. It's designed purely for straight-line bullet seating and precise depth control rather than applying a crimp. That focus on alignment is a big part of why it produces such concentric, low-runout rounds.
Will this Forster die fit my reloading press?
It uses the standard 7/8-14 die thread, so it threads into any common single-stage or turret press. If your current rifle dies fit your press, this one will too. No special adapter is needed.
How does the micrometer head help with seating depth?
The micrometer top lets you fine-tune bullet seating depth in .001 inch increments, adjustable in either direction. The sharp white graduations are easy to read and record, so once you find a load that shoots, you can return to that exact setting any time. It takes most of the trial and error out of establishing depth.
What makes the Ultra Micrometer seater more accurate than a basic seating die?
The key is the floating chamber sleeve, a spring-loaded sliding chamber that fully captures the case and supports its full outside diameter before the bullet is seated. This holds the bullet, case, and seating stem in the same axis through the whole stroke. The result is better concentricity and noticeably lower runout than seaters that only support the case rim or neck.




Reviews
There are no reviews yet.