Description
If you shoot a 7×57 Mauser and reload brass that's been fired through your own rifle, the Lee Collet Neck Sizing Die is one of the simplest ways to tighten up your groups. Rather than working the whole case, it sizes only the neck using a steel collet that gently squeezes the brass down against a hardened mandrel. The result is a straight, concentric neck with consistent bullet tension and very little runout, which is exactly what you want when chasing accuracy.
What Sets the 7×57 Mauser Collet Die Apart
The big draw here is the no-lube process. Because the collet only touches the neck, there's no sticky case lubricant to apply beforehand or scrub off afterward. That saves time and keeps your brass clean. It also works the metal far less than a conventional full-length die, so the necks don't harden as quickly. In plain terms, your brass sees less stress and lasts through more firings before it needs annealing or ends up splitting.
Getting the Most From Your Lee Collet Neck Sizer
The die deprimes the case as it sizes, so it handles two jobs in one stroke. A handy trick a lot of reloaders swear by is to size once, back the case out about an inch, rotate it roughly an eighth of a turn, then size again. That spreads the collet petals across the high spots of the neck for a rounder result and slightly more uniform bullet grip. It only costs a second per case and makes a noticeable difference.
Keep in mind this is a neck sizing die meant for brass fired in your own chamber. If you're loading new or mixed range brass, a full-length sizer is the better call. For folks running a dedicated 7×57 and reloading their own fired cases, this die earns its spot on the bench. It uses the standard 7/8"-14 thread, so it drops right into any common single-stage or turret press.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91010
- Model: 91010
- UPC: 734307910105
- Cartridge: 7x57mm Mauser (7mm Mauser)
- Die Type: Collet Neck Sizing Die
- Firearm Type: Rifle
- Thread Size: 7/8"-14
- Lubrication Required: No
- Material: Steel collet and mandrel
- Country of Origin: United States
What’s Included
- Lee Precision 7x57mm Mauser Collet Neck Sizing Die (die only)
Frequently Asked Questions
Does the 7×57 Mauser collet die require case lube?
No, and that's one of its best features. The collet squeezes only the neck against the mandrel, so there's no need to lubricate the case body. That saves you the mess of applying and cleaning off lube on every load.
Can I use this die with range brass or new brass?
Lee recommends this neck sizing die for brass that has been fired through your own rifle. Neck sizing preserves the fire-formed fit to your chamber. For new or mixed range brass, a full-length sizing die is the better option since it works the whole case.
Does the Lee collet neck sizer deprime the case too?
Yes. It deprimes the case as it sizes the neck, so you handle both steps in a single pass through the press. That keeps your workflow simple and efficient.
Will this die fit a standard reloading press?
It uses the common 7/8"-14 thread, so it threads right into virtually any standard single-stage or turret press. No special adapters or hardware are needed to get it running.



Reviews
There are no reviews yet.