0
0

Forster 7mm Rem SAUM Ultra Micrometer Seater Die | U00087

UPC: 757253100154

$118.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading for the 7mm Remington Short Action Ultra Mag and chasing tight groups, the seater die is where a lot of your accuracy gets made or lost. Forster's Ultra Micrometer Seater Die for the SAUM takes the guesswork out of it. A spring-loaded floating chamber sleeve captures the case before the bullet ever starts moving, holding both in perfect alignment so your finished rounds come out concentric with minimal runout. That straight-line seating is the same feature benchrest crowd has trusted from Forster for decades.

What the Micrometer Head Does for Your 7mm SAUM Loads

The micrometer top is the headline feature here. It lets you fine-tune seating depth in either direction, adjustable down to about .0005 inch, with gradations clearly marked at .001 inch increments. The bright white markings are genuinely easy to read and record, so once you find the sweet spot for your bullet of choice you can write down the setting and dial right back to it next time. No more trial-and-error shimming or guessing when you switch between bullets.

Build Quality on the Forster Ultra Seater Die

Forster machines these dies from quality steel to tight tolerances and hand polishes them before and after heat treating for a smooth finish. The seating stem is shaped to fit high B.C. bullets well, leaving the bullet nose unmarked even on mildly compressed loads. It's a non-crimping design, which is exactly what you want for precision rifle work where consistent neck tension matters more than a crimp.

Fitting the SAUM Seater Into Your Press

This die comes with Forster's Cross Bolt Die Lock Ring, which clamps around the full body instead of digging a set screw into the threads. That means repeatable alignment with no canting and no thread damage when you lock your setting. It uses the standard 7/8-14 thread, so it drops into most common reloading presses without fuss. Made in the U.S.A.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: U00087
  • UPC: 757253100154
  • Cartridge: 7mm Remington Short Action Ultra Magnum (SAUM)
  • Die Style: Bullet Seating Die
  • Die Type: Non-Crimping
  • Micrometer Adjustment: Adjustable to .0005 inch
  • Graduations: Marked at .001 inch increments
  • Thread Size: 7/8-14
  • Lock Ring: Forster Cross Bolt Die Lock Ring
  • Material: Machined, hand-polished, heat-treated steel
  • Country of Origin: USA

What’s Included

  • One Forster Bench Rest Ultra Micrometer Seater Die
  • Forster Cross Bolt Die Lock Ring
  • Storage case
  • Instructions

Frequently Asked Questions

What makes the Ultra Micrometer Seater Die more accurate than a standard seater?

Two things set it apart. The floating chamber sleeve fully captures the case before seating starts, keeping bullet and case in straight-line alignment for concentric rounds. On top of that, the micrometer head lets you adjust seating depth to roughly .0005 inch, so you can fine-tune to your load and come back to the exact setting later.

Does this 7mm SAUM die crimp the case?

No, this is a non-crimping seater die. That's the preferred setup for precision rifle loading where consistent neck tension and concentricity matter more than a crimp. If you need to crimp, you would use a separate dedicated crimp die.

Will the Forster Ultra Micrometer Seater Die fit my press?

It uses the standard 7/8-14 thread, so it fits most common single-stage and turret reloading presses on the market. You will still need the correct shell holder for the 7mm SAUM case, which is not included with the die.

Can I switch between different bullets without re-doing all my setup?

Yes, and that's one of the best parts of the micrometer top. Just record your seating depth setting for each bullet, and when you switch you can dial the micrometer right back to that number. The bright white graduations make it easy to read and log your settings.

Additional information

UPC

757253100154

Manufacturer

Manufacturer Part Number

U00087

Reviews

There are no reviews yet.

Be the first to review “Forster 7mm Rem SAUM Ultra Micrometer Seater Die | U00087”