0
0

Lee Precision 7mm Remington Magnum Full Length Sizing Die

UPC: 734307910648

$17.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision 7mm Remington Magnum Full Length Sizing Die handles the first and most important step in loading your belted magnum brass. On a single pull of the press handle, it squeezes the whole case back down to factory specs, knocks out the spent primer, and runs the expander ball through the neck to open it back up for a new bullet. It's the single die you want when you're working with brass that's been shot through different rifles or picked up off the range, since full length sizing makes sure your finished rounds chamber in any 7mm Rem Mag.

What the 7mm Rem Mag Sizing Die Does on the Press

The die body sizes the case down slightly undersized, and the expander ball on the decapping rod opens the neck back to the right inside diameter as the case is pulled free. The decapping pin punches out the old primer at the same time, so sizing and depriming happen together. Setup is straightforward: with a case in the shell holder and the ram raised, you run the die down until it contacts the shell holder, then fine tune from there to get the shoulder bump you want. One thing worth knowing is that the decapper plays a part in the sizing process, so it needs to stay installed when you resize.

Steel Build and the Case Lube It Needs

This is a steel die, not carbide, which means case lubrication is a must. A thin film below the shoulder and a touch inside the neck keeps cases moving smoothly and prevents the dreaded stuck case. Go easy on it though, since too much lube causes those little lube dents in the shoulder. Spread it from where the shoulder begins down toward the base and you'll be in good shape.

How the 7mm Remington Magnum Full Length Die Fits Your Bench

The 7mm Rem Mag earned its reputation as a flat-shooting, hard-hitting magnum for Western hunting and long range work, and reloading it lets you tune loads to your rifle while stretching your brass supply. This is the standalone single die, perfect if you already have a seating die and just need a dependable sizer, or you're building a custom die setup piece by piece.

Key Specifications

  • Manufacturer: Lee Precision
  • Cartridge: 7mm Remington Magnum
  • Die Type: Full Length Sizing Die
  • Material: Steel
  • Gun Type: Rifle
  • Functions: Resizes, decaps, and expands case neck
  • Case Lube: Required (non-carbide)
  • Manufacturer Part Number: 91064
  • UPC: 734307910648
  • Country of Origin: United States

What’s Included

  • 7mm Remington Magnum Full Length Sizing Die
  • Decapping rod with expander ball and decapping pin
  • Storage box

Frequently Asked Questions

Does the 7mm Rem Mag full length sizing die come with a shell holder?

No, this is the single sizing die on its own and does not include a shell holder. You'll need the correct shell holder for the 7mm Remington Magnum case head to run it on your press. If you want the shell holder included along with seating and crimp dies, look at one of Lee's complete 7mm Rem Mag die sets instead.

Do I have to use case lube with this die?

Yes, case lubrication is required since this is a steel die rather than carbide. Spread a thin film of sizing lube below the shoulder and a small amount inside the neck before resizing to keep the case from sticking. Just don't overdo it, because too much lube causes dents in the case shoulder.

What's the difference between full length sizing and neck sizing for 7mm Rem Mag?

Full length sizing squeezes the entire case back to factory dimensions, which guarantees your rounds chamber in any 7mm Rem Mag rifle. It's the right choice for mixed brass, range pickups, or any brass fired in a different gun. Neck sizing only works the neck and is best reserved for brass fired in the same rifle it'll be loaded for.

Can I remove the decapping pin and still size my brass?

The decapping rod needs to stay in place because the expander ball on it opens the case neck back up as part of the sizing process. If you pull it, you lose the neck expansion step and won't be depriming either. Leave the assembly installed and just set the pin so it pushes the primer clear.

Additional information

UPC

734307910648

Manufacturer

Manufacturer Part Number

91064

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 7mm Remington Magnum Full Length Sizing Die”