Description
The Redding Competition Bushing Neck Die Set for 7mm Remington Magnum is aimed squarely at the handloader who sorts brass, chases tight neck tension, and wants every round to chamber the same way twice. This is a three-die set covering a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Seating Die. Both the neck sizer and the seater run micrometer heads, so you can set your neck sizing amount and seating depth to a repeatable number and come right back to a favorite setting later.
What the 7mm Rem Mag Competition Bushing Neck Die Set Brings to the Bench
The real magic here is alignment. Each competition die uses a precision ground sliding sleeve that captures and centers the case before any sizing or bullet seating begins, which is what keeps neck and bullet runout to a minimum. On the sizing side, the interchangeable bushing self-centers on the case neck while the case stays supported, and the micrometer lets you control exactly how much of the neck gets sized. That makes partial neck sizing, a longtime benchrest favorite, easy to fine-tune. The seater uses Redding's floating stem design so the bullet stays straight on its way into the case.
Fitting Bushings and Brass to Your 7mm Rem Mag Neck Die Set
A couple of things worth knowing before you order. This set does not come with neck bushings, and it does not include a size button. That is by design, since it is meant for folks running brass that has been sorted for neck wall thickness or neck turned. You pick your bushing to match your brass and target neck tension. For 7mm Rem Mag, Redding's listed bushing range runs roughly .305 to .313, and it uses a #6 standard shellholder. If you want the tightest shoulder bump control, pairing it with Redding Competition Shellholders is a smart move.
The seater ships with a standard stem that handles most bullet shapes, and a VLD stem is offered separately if you're loading long, sleek match bullets. Carbide size button kits are also available down the road if your needs change.
Key Specifications
- Manufacturer: Redding
- Caliber: 7mm Remington Magnum
- Manufacturer Part Number: 58136
- UPC: 611760581366
- Set Type: 3-Die Competition Bushing Neck Set
- Dies Included: Bushing Neck Sizing Die, Body Die, Competition Seating Die
- Adjustment: Micrometer on neck sizer and seater
- Bullet Diameter: 0.284 in
- Bushing Range: 0.305 to 0.313 in
- Standard Shellholder: #6
- Thread: 7/8"-14
- Size Button: Not included (for sorted/neck-turned brass)
- Seating Stem: Standard stem included; VLD stem sold separately
What’s Included
- Competition Bushing Neck Sizing Die
- Body Die
- Competition Seating Die (with standard seating stem)
Frequently Asked Questions
Does the 7mm Rem Mag Competition Bushing Neck Die Set come with bushings?
No, neck sizing bushings are sold separately. This lets you choose the exact bushing to match your brass and the neck tension you want. For 7mm Rem Mag, Redding lists a bushing range of roughly .305 to .313.
Why isn't a size button included in this die set?
The set is built for handloaders who have sorted their brass for neck wall thickness or turned their necks, so a size button isn't needed. The bushing handles neck sizing instead, and the micrometer lets you fine-tune how much of the neck gets sized. If you decide you want one later, carbide size button kits are available separately.
What's the difference between this set and a standard full-length die set?
This competition set is designed around neck sizing with an interchangeable bushing, plus a Body Die for resizing the case body and bumping the shoulder when your brass starts getting tight to chamber. Both the neck sizer and seater use micrometer heads for repeatable, precise settings. A standard full-length set sizes the whole case every time and typically lacks the bushing system and micrometer adjustments.
Can I seat long VLD match bullets with the Competition Seating Die?
The seater ships with a standard stem that works with most bullet profiles. For long, sleek VLD or high-BC match bullets, Redding offers a VLD-profile seating stem separately that better fits those ogives. Keep in mind the Competition Seating Die isn't intended for heavily compressed loads.




Reviews
There are no reviews yet.