0
0

Hornady 7mm PRC Full Length Sizer Die | Custom Grade 046306

UPC: 090255463064

$40.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading for the 7mm PRC and want brass that chambers clean every time, this single Hornady Custom Grade full length sizer die does the heavy lifting. It resizes the whole case back toward factory spec and deprimes in the same stroke, which is exactly what you want when you're running the same brass through multiple firings or feeding a hunting rig that needs to cycle without hiccups. This is the standard full length sizer, part number 046306, sold as an individual die rather than a complete set.

What the 7mm PRC Sizer Brings to the Bench

The heart of this die is the Zip Spindle, a decapping assembly with light threads cut on both the spindle and collet. That design keeps it from slipping mid-session and makes dialing in your decap pin depth painless. The internal profile is precision machined and polished smooth, so cases feed in and release without the dreaded stuck-case feeling that comes from a rough die. It's built to a standard Hornady doesn't shy away from, backed by a guarantee against breaking or wearing out under normal use.

Why Reloaders Reach for This Elliptical Expander

Instead of an old-school ball expander, Hornady fits this die with a polished elliptical expander. It slides through the neck with less drag, which cuts down on friction and case neck stretch over time. Less working of the brass means longer case life and more consistent neck tension round to round, and that consistency is what shows up on paper at distance. The hardened steel decapping pin holds up well too, even when you're punching out crimped primers.

Fitting the 7mm PRC Full Length Die to Your Press

This die uses the standard 7/8-14 thread, so it threads into any common single stage or progressive press with that bushing. The 7mm PRC is a beltless magnum built around the .284 bore, and full length sizing is the practical choice for most folks running one, especially hunters and long range shooters who prioritize reliable chambering. Pair it with a seating die to round out your setup and you're ready to build loads for everything from ELD-X hunting bullets to heavy match projectiles.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 46306
  • UPC: 090255463064
  • Cartridge: 7mm PRC
  • Bullet Diameter: .284 in
  • Die Type: Full Length Sizer Die
  • Product Line: Custom Grade New Dimension
  • Thread Size: 7/8-14
  • Quantity: 1 Die
  • Spindle: Zip Spindle
  • Expander: Polished Elliptical Expander
  • Decapping Pin: Hardened Steel
  • Material: Steel

What’s Included

  • One Hornady Custom Grade full length sizer die (7mm PRC)
  • Zip Spindle decapping assembly with hardened steel decapping pin
  • Elliptical expander
  • Sure-Loc lock ring

Frequently Asked Questions

Is this 7mm PRC full length die a complete die set?

No, this is a single full length sizer die, part number 046306. It handles resizing and depriming only. If you want to seat bullets, you'll need to add a seating die, or you can pick up a complete 2-die set instead.

Does the 7mm PRC full length sizer use neck bushings?

No. This is the standard Custom Grade sizer with a fixed elliptical expander, not the Match Grade bushing version. If you specifically want interchangeable neck bushings for custom neck tension, you'd want Hornady's Match Grade die instead.

Will this die fit my reloading press?

Yes, it uses the standard 7/8-14 thread found on virtually all common single stage and progressive presses. Thread it into your press bushing, set your sizing depth, and lock it down with the included Sure-Loc ring.

What does the Zip Spindle actually do?

The Zip Spindle is Hornady's decapping stem system with light threads on the spindle and collet. It locks positively so it won't slip during a session, and it lets you make fine depth adjustments by turning the spindle or zip it up and down quickly for bigger moves. It takes the fight out of setting decap pin height.

Additional information

UPC

090255463064

Manufacturer

Manufacturer Part Number

046306

Reviews

There are no reviews yet.

Be the first to review “Hornady 7mm PRC Full Length Sizer Die | Custom Grade 046306”