$84.48
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
L.E. Wilson has been building precision hand dies for over 90 years, and this 7mm PRC bushing neck sizing die carries that same reputation for tight tolerances and repeatable results. It sizes only the neck of your fire-formed brass, leaving the body untouched so your cases keep that custom fit to your chamber. For anyone loading the 7mm PRC for long-range work or hunting accuracy, this is the kind of tool that makes a real difference on paper.
This is an arbor press style hand die, not a threaded die for a standard reloading press. You lightly lube the case neck, press the case into the die until it's flush, then flip the die onto a decapping base to push the case back out and knock the spent primer free. The whole process is smooth and quiet, and the die is small enough to bring right to the range. It's worth noting the decapping base is required to use the decapping function and is sold separately, along with the arbor press itself.
The heart of this setup is the interchangeable bushing system. Instead of a one-size-fits-all neck diameter, you drop in a bushing sized to your exact brass and bullet combo, which lets you control precisely how much grip the neck has on the bullet. Because there's no conventional expander ball being dragged back through the neck, you get better concentricity and your brass lasts noticeably longer. The die sizes the neck down from the mouth, a method a lot of precision loaders swear by for consistency.
Keep in mind the bushings are sold separately so you can match the size to your load. To figure out which one you need, measure a loaded round at the neck and subtract two to three thousandths. Built from heat-treated steel and finished to Wilson's standards, this die is a dependable building block for a serious 7mm PRC load development bench.
No, the bushings are sold separately so you can match the size to your specific brass and bullet combination. To find your size, measure a loaded round where the bullet sits in the neck, then subtract two to three thousandths. This system is what lets you fine-tune your exact neck tension.
Yes, this is a hand die designed for use with an arbor press rather than a standard threaded reloading press. The press drives the case into the die to size the neck. The press is not included and is purchased separately.
The die includes a de-capping rod, but the neck die decapping base needed to remove spent primers is sold separately. After sizing the neck, you flip the die onto the base and press the case out, which also pops the spent primer free into the base cavity. One base works across all Wilson neck die calibers.
A bushing neck die sizes only the case neck and skips the conventional expander ball entirely, which improves neck concentricity and keeps your brass from getting overworked. Because it leaves the fire-formed body alone, your cases keep their custom fit to your chamber and tend to last longer. It's a go-to choice for precision reloaders chasing tight groups.
| UPC | 815145029942 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SND-7PRC |
You must be logged in to post a review.
Reviews
There are no reviews yet.