$64.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
When you're cleaning a rifle the right way, the rod matters just as much as the solvent, and Bore Tech's Proof-Positive Bore Stix has earned its reputation as one of the better coated one-piece rods out there. This one is sized for 7mm up through .30 and .308/8mm barrels, giving you a snug caliber-specific fit that keeps the rod centered in the bore. The 44-inch working length is built for long-barreled rifles, and remember the listed length is the working length, so you'll add about 5.5 inches for the handle when you're figuring out clearance on your cleaning bench.
The heart of this rod is a caliber-specific high-strength steel core that keeps bow and flex to a minimum, so every stroke stays straight and controlled through the whole bore. Over that core sits a proprietary low-friction coating that shrugs off solvents and won't peel, crack, or trap carbon and fouling the way cheaper finishes do. That combination is why folks who own two or three of these keep buying more for their other calibers.
The free-floating dual ball bearing handle is the feature people talk about most. It spins effortlessly so the patch or brush follows the rifling instead of fighting it, which also stops the annoying habit of jags and brushes backing themselves off mid-stroke. The red color-coded, non-slip rubber grip tells you at a glance which caliber you've grabbed, and there's an index dot system on the handle that lets you check your barrel's twist rate while you clean.
The replaceable female Proof-Positive tip uses 8-32 threads and accepts most standard jags, brushes, and adapters. Because it isn't brass, it won't throw a false copper reading when you're running a copper-removing solvent, which takes the guesswork out of knowing when the bore is truly clean. The machined tip also makes for a smooth transition between rod and jag, so you're not risking your crown when you draw the rod back through. Pair it with a bore guide and this rod will give you years of dependable service.
This rod is sized for 7mm/.284 up through .30, .308, and 8mm bores. The caliber-specific core is matched to that diameter range so the rod stays centered and rigid inside the barrel. It's a great match for common hunting and target rounds like .308 Win, .30-06, 7mm Rem Mag, and 6.5 that fall in the .30 family of tips.
The Proof-Positive tip is a non-brass design, so when you run a copper-removing solvent it won't leave a false blue or green stain on your patch the way a brass tip can. That means the copper you see is coming from the bore, not the rod, so you know when the barrel is genuinely clean. The female 8-32 tip is also replaceable and accepts most standard jags and brushes without extra adapters.
The 44 inches refers to the working length of the rod itself, not including the handle. To get the overall length you'll want to add roughly 5.5 inches for the handle when planning bench space or storage. This longer length is built for full-size and long-barreled rifles.
The free-floating dual ball bearing handle lets the rod spin freely as it travels down the bore, so the patch or brush follows the rifling instead of dragging against it. That gives you a cleaner, more consistent stroke and stops jags and brushes from unthreading themselves mid-pass. Using a bore guide alongside it will keep both the rod and your crown protected.
| UPC | 667739973441 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BSTX-7344-00 |
| Caliber/Gauge | .30 Caliber |
| Length | 44 |
| Style | Rifle |
You must be logged in to post a review.
Reviews
There are no reviews yet.