0
0

Forster 7mm-08 Remington Ultra Micrometer Seater Die U00076

UPC: 757253006548

$118.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone who has chased the perfect 7mm-08 load knows that seating depth can make or break accuracy, and this Forster Ultra Micrometer Seater Die takes the guesswork out of getting there. It carries all the straight-line seating features of Forster's original Bench Rest seater and adds a precision micrometer head on top, so you can fine-tune bullet depth without the usual trial and error.

What sets this die apart is the spring-loaded sliding chamber sleeve. It fully captures the case before the bullet ever starts moving, then holds the bullet, case, and seating stem on a common axis through the entire stroke. That close fit is where the low runout comes from, and it is the reason reloaders who have used Redding and RCBS micrometer dies often keep coming back to the Forster for concentricity.

Why the Micrometer Head on the 7mm-08 Ultra Seater Earns Its Keep

The micrometer adjusts in either direction and is readable down to .0005 inch, with clear index marks at every .001 inch. The white markings are easy to read and easy to record, which matters if you run several bullet styles through the same rifle. Seat a round close, measure it, then dial the stem to your exact number and the next cartridge comes out right where you want it. Keeping notes on your optimal setting for each bullet means you can return to a proven load in seconds.

Built for the 7mm-08 Remington Reloader Who Chases the Lands

This is a non-crimping seater, so it is built purely for precision bullet placement rather than a roll or taper crimp. That makes it a natural fit for the 7mm-08 hunter or target shooter who wants to seat bullets right off the lands and squeeze every bit of consistency out of their brass. The seating stem contacts the bullet well back on the ogive to protect the tip and keep things true.

Machined in the USA and compatible with standard 7/8-14 threaded presses, it drops right into whatever single-stage or turret setup you already run. Pair it with a quality sizing die and good brass prep and you have a seating setup that will serve you for a very long time.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: 7mm-08 Remington
  • Die Style: Ultra Micrometer Bullet Seating Die
  • Crimp Type: Non-crimping
  • Micrometer Adjustment: Readable to .0005 inch, marked in .001 inch increments
  • Alignment: Spring-loaded floating chamber sleeve
  • Thread Size: 7/8-14
  • Country of Origin: Made in USA
  • Manufacturer Part Number: U00076
  • UPC: 757253006548

What’s Included

  • One Forster Bench Rest Ultra Micrometer Seater Die
  • Forster split-type lock ring
  • Storage case
  • Instructions

Frequently Asked Questions

Does the Forster 7mm-08 Ultra Micrometer Seater Die crimp the case?

No, this is a non-crimping style seater. It is designed purely to seat the bullet with precise alignment and depth control. If you want to crimp your 7mm-08 rounds, you would need to add a separate crimp die to your process.

How precise is the micrometer adjustment on this 7mm-08 seater die?

The micrometer head adjusts in either direction and is readable down to .0005 inch, with clearly marked index lines at every .001 inch. The bright white markings make it easy to read and record your settings. That lets you return to a proven seating depth for each bullet without starting over every session.

Why does this Forster die produce such straight, low-runout rounds?

The die uses a spring-loaded sliding chamber sleeve that fully captures the case before seating begins. It holds the bullet, case, and seating stem on a common axis through the entire stroke, which is where the match-grade concentricity comes from. Reloaders often note tighter runout with this design compared to standard seaters.

Will this die fit a standard reloading press?

Yes, it uses the industry-standard 7/8-14 thread, so it threads into typical single-stage and turret presses. It also works well in a Forster Co-Ax press. Just set the die so the bottom of the sliding chamber contacts the shell holder for consistent results.

Additional information

UPC

757253006548

Manufacturer

Manufacturer Part Number

U00076

Reviews

There are no reviews yet.

Be the first to review “Forster 7mm-08 Remington Ultra Micrometer Seater Die U00076”