Description
Forster built its reputation on reloading gear that holds tight tolerances, and this full length sizing die for the 7mm-08 Remington is a perfect example of why handloaders keep coming back. In one pass it sizes the case neck, shoulder, and body, sets headspace, deprimes, and expands the neck, bringing fired brass back to factory new dimensions so your rounds chamber smoothly in any standard chamber. Each die is machined by hand with one-piece reamers from quality steel, then hand polished before and after heat treating for a seriously smooth interior.
What Sets the 7mm-08 Full Length Sizer Apart
The standout feature here is Forster's exclusive elevated E-Z Out expander ball. That floating spindle assembly self-corrects any misalignment and keeps the case neck from getting pulled off-center as it draws back through, which translates to better concentricity and less runout on your finished rounds. There's also a precisely placed vent hole in the die body that lets trapped air and lube escape, so you're not denting cases or stressing the die's internals.
Dialing In Your 7mm-08 Remington Loads
Most reloaders start their bench rest die collection with a full length sizer because it gives you the most flexibility. Run it as a standard full length resize after each firing when brass flow calls for it, or back the die off slightly to partial-size and preserve the fire-formed fit for a specific rifle. For brass with crimped military primers, you'll want to knock the primer out with a separate decapping step first. The included Cross Bolt die locking ring clamps the split ring evenly rather than biting a set screw into the die threads, so your settings stay put and the body doesn't get marred.
Worth noting that this is the same quality as Forster's Bench Rest dies since Forster only makes one grade, so you're getting their top tier whether it says bench rest on the box or not.
Key Specifications
- Manufacturer: Forster Products
- Cartridge: 7mm-08 Remington
- Die Type: Full Length Sizing Die
- Number of Dies: 1
- Material: Case Hardened Steel
- Expander System: Elevated E-Z Out Floating Expander Ball
- Locking Ring: Forster Cross Bolt Die Locking Ring
- Functions: Sizes neck, shoulder, and body; sets headspace; deprimes; expands neck
- Country of Origin: United States
- Manufacturer Part Number: 007981
- UPC: 757253001680
What’s Included
- Forster 7mm-08 Remington full length sizing die (1)
- Decapping / expander unit
- Cross Bolt die locking ring
Frequently Asked Questions
Does the 7mm-08 full length sizing die include a shell holder?
No, a shell holder is not included with this die. If you're running it in a standard non-Forster press, use the shell holder recommended by your press manufacturer. If you're using a Forster Co-Ax press, you won't need one at all since those presses don't use shell holders.
Will this die deprime the case while sizing?
Yes. In a single stroke it resizes the neck, shoulder, and body while knocking out the spent primer and expanding the case neck. For military brass with crimped primers, it's best to remove the primer with a separate decapping step first before running it through this die.
What is the E-Z Out expander and why does it matter?
The E-Z Out is Forster's floating, elevated expander ball system that sits higher on the spindle. Because it floats, it self-corrects misalignment and keeps the case neck from being pulled off-center as the brass draws back through. The result is better concentricity and less runout on your loaded rounds.
Is this the same as a Forster Bench Rest sizing die?
It is. Forster only makes one grade of die, so this full length sizer is built to the same bench rest quality standard as everything else they produce. You're getting hand-machined, hand-polished, tight-tolerance construction regardless of what the label says.



Reviews
There are no reviews yet.