Description
If you've got a firearm with oddball hole spacing or a build that nothing off the shelf will fit, this EGW Picatinny rail blank gives you a clean starting point. It's machined from a single piece of solid 7075 T6 aircraft-grade aluminum and finished in a Type III matte black hardcoat anodize, so it holds up to real use once it's cut and mounted. The slots are already machined to MIL-STD-1913 dimensions, which means any standard Picatinny ring will drop right in once the rail is fitted to your gun.
What the EGW Rail Blank Actually Is
This is a blank, and that's the whole point. It measures 7.75" long with a nominal height of roughly 0.735", and the bottom comes flat with no radius cut. There are no screw holes drilled and no mounting hardware included. The idea is that you or your gunsmith radius the bottom to match your receiver contour and drill the holes exactly where your action needs them, giving you a custom base instead of forcing a pre-made mount to work.
Fitting the 7.75" Picatinny Blank
Because the cross slots are already cut to spec, the tedious part is handled. EGW recommends having the blank machined and fitted by a qualified machinist or gunsmith, which makes sense given that the whole value here is a precise, custom fit. Once it's radiused and drilled, you end up with a rock-solid optic platform built specifically for your firearm rather than a compromise.
Built From Solid 7075 Aluminum
7075-T6 is about as tough as aluminum gets for this kind of application, which is why EGW uses it on their heavy-duty line. You get the strength to handle recoil and ring torque without the weight of a steel base. Made in the USA, it's a straightforward, well-made blank for anyone tackling a custom scope mounting project.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 89000
- UPC: 841370109678
- Material: Solid 7075 T6 Aircraft-Grade Aluminum
- Finish: Matte Black Type III Hardcoat Anodized
- Length: 7.75 in
- Height: 0.75 in (nominal 0.735 in)
- Width: 1 in
- Style: Picatinny (MIL-STD-1913)
- Slots: Pre-cut cross slots
- Bottom Profile: Flat, not radiused
- Screw Holes: None (undrilled blank)
- Number of Bases: 1
- Elevation: 0 MOA
- Country of Origin: Made in USA
What’s Included
- One 7.75" EGW 7075-T6 aluminum Picatinny rail blank
Frequently Asked Questions
Does the Picatinny rail blank come drilled for screws?
No, this is an undrilled blank. It ships with no screw holes and no mounting hardware. The intent is for you or your gunsmith to drill the holes to match your specific action.
Will standard Picatinny rings fit this EGW rail blank?
Yes. The cross slots are pre-cut to MIL-STD-1913 Picatinny dimensions, so any standard Picatinny scope ring will fit once the rail is machined and mounted to your firearm.
Is the bottom of the rail flat or radiused?
The bottom comes completely flat with no radius. That lets a machinist cut it to match the contour of your receiver, whether you're working with a flat-bottom action or a rounded one.
Do I need a gunsmith to install the 7.75" rail blank?
EGW recommends having it machined and fitted by a qualified machinist or gunsmith. Since the whole purpose of a blank is a precise custom fit, the radius cut and hole drilling are best left to someone with the right tooling.





Reviews
There are no reviews yet.