Description
If you shoot a bolt-action or single-shot in 7.62×39 and want to get more out of your brass, the Lee Precision collet neck sizing die is a smart, no-fuss tool to have on the bench. Instead of working the entire case body like a full-length die, this one sizes only the neck. A steel collet squeezes the fired case neck down against a precision mandrel, giving you a straight, concentric neck and consistent bullet tension round after round.
How the 7.62×39 Collet Neck Sizing Die Works
The design is refreshingly simple. You drop a once-fired case into the die, run it up into your press, and the collet closes on the neck, squeezing it against the internal mandrel. Because it only touches the neck, the body stays fire-formed to your chamber, which means less brass stretching, fewer trimming sessions, and noticeably longer case life. Best of all, there is no case lube involved, so your brass stays clean and your hands stay out of the mess.
What to Know Before You Load With the 91016
One detail worth flagging so you set up right: Lee builds this die around a .308 diameter mandrel. Plenty of 7.62×39 bullets run .310 or .311, so if that is what you are loading, you will want to chamfer your case necks to get proper fit. It is also worth noting this die is intended for brass that has been fired in your own rifle, since neck sizing keeps cases matched to that specific chamber. If you are feeding a semi-auto or swapping brass between guns, a full-length die is the better call.
Why Reloaders Reach for the Lee Collet Die
Lee dies are machine honed to a smooth finish, and the collet system lets you fine-tune neck tension without buying a drawer full of bushings or mandrels. Reloaders consistently point to the tight runout, the clean no-lube process, and the straightforward value. For anyone chasing accuracy out of a precision 7.62×39, it is a tool that earns its spot in the kit.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91016
- UPC: 734307910167
- Die Type: Collet Neck Sizing Die (die only)
- Caliber: 7.62x39mm
- Mandrel Diameter: .308"
- Lubrication: No case lube required
- Collet Material: Steel
- Thread: 7/8 x 14
- Country of Manufacture: United States
What’s Included
- Lee Precision 7.62x39mm collet neck sizing die (die only)
Frequently Asked Questions
Does the 7.62×39 collet neck sizing die require case lube?
No, and that is one of the big draws. The collet squeezes the neck against the mandrel rather than forcing the whole case through a sizing ring, so no lubrication is needed. That keeps your brass clean and skips the extra cleanup step.
What bullet diameter does the Lee 91016 die work with?
The die is built around a .308 diameter mandrel. Many 7.62×39 loads use .310 or .311 bullets, so if that is what you are loading, you will need to chamfer your case necks for proper fit. It is worth checking your bullets before you set the die up.
Can I use this collet die for semi-auto 7.62×39 rifles like an AK or SKS?
Neck sizing is intended for brass fired in a specific rifle, since it keeps the case body fire-formed to that chamber. It shines in bolt-action and single-shot setups. For semi-autos or brass you are swapping between guns, a full-length sizing die is the better choice for reliable feeding.
Is this the complete die set or just the sizing die?
This is the collet neck sizing die only. It does not include a bullet seater, shell holder, or powder dipper. If you want the full package, Lee offers a complete collet die set, but this listing covers the single sizing die.




Reviews
There are no reviews yet.