Description
The 7.62×39 has always been a workhorse cartridge, and Faxon's Duty Series Gunner barrel finally gives it a proper home on the AR-15 platform. Machined from 4150 CMV steel and treated with a salt bath nitride finish inside and out, this 16-inch barrel is built to shrug off corrosion, run hot, and hold up under steady range time. The 1:8 twist does a nice job stabilizing the heavier .310 projectiles this round is known for, and Faxon backs it with the same in-house testing the company puts every barrel through.
What Makes the Gunner Profile Different
The Gunner contour is Faxon's signature blend of two classic profiles. It keeps the Government taper from the barrel extension back toward the gas block for strength, then transitions to a slimmer pencil-style front end to shed weight. The payoff is a barrel that carries lighter and brings the balance point back toward your shoulder, which cuts down on fatigue whether you're running drills, hunting, or just burning through a case of ammo on a Saturday.
Gas System and Build Details
This one runs a mid-length gas system, which softens the recoil impulse and gives you a smoother, more forgiving cycle than a carbine setup on a 16-inch barrel. It ships with a .750 gas block journal, 5/8×24 muzzle threads, an M4-profile extension, and an 11-degree target crown for clean bullet release. Every barrel is stress relieved, air-gauge tested, and magnetic particle inspected before it leaves the shop in Cincinnati.
Building Around the Faxon 7.62×39 Gunner Barrel
Keep in mind that a 7.62×39 build is its own animal. You'll want a caliber-specific bolt carrier group and magazines made for the round, since 5.56 parts won't cut it here. Pair it with those correct components and this barrel makes a reliable, accurate core for a lightweight AR chambered in one of the most battle-tested cartridges out there. Shooters have reported honest sub-1.5 MOA groups with quality ammo, which is plenty for a caliber built more for punch than paper-punching precision.
Key Specifications
- Manufacturer: Faxon Firearms
- MPN: 15A78M16NGQ
- UPC: 816341023369
- Caliber: 7.62x39mm
- Barrel Length: 16"
- Twist Rate: 1:8
- Profile: Gunner
- Gas System: Mid-Length
- Barrel Material: 4150 CMV Steel
- Barrel Type: Button Rifled
- Finish: Salt Bath Nitride (Inside & Out)
- Muzzle Thread: 5/8×24 TPI
- Gas Block Journal: .750"
- Barrel Extension: M4
- Crown: 11-Degree Target Crown
- Weight: 1.48 lbs
What’s Included
- Faxon 16" Gunner Profile 7.62×39 barrel
Frequently Asked Questions
What twist rate is the Faxon 7.62×39 Gunner barrel and what does it stabilize?
This barrel uses a 1:8 twist, which is well suited to the heavier .310 projectiles common in 7.62×39 loads. It reliably stabilizes the typical 122 to 124 grain bullets you'll find in most ammo, including steel-cased fodder. That makes it a versatile choice for range work and hunting alike.
Can I use a standard 5.56 bolt carrier group with this barrel?
No, 7.62×39 needs its own caliber-specific bolt carrier group because the case head and bolt face differ from 5.56. You'll also want magazines designed for the round, since standard AR mags won't feed it reliably. Faxon and other makers offer dedicated 7.62×39 BCGs to pair with this barrel.
Does the Faxon Gunner barrel come dimpled for a set-screw gas block?
Faxon does not dimple these barrels from the factory, and they make that clear up front. If you're running a set-screw gas block, you can dimple it yourself with a jig or clamp on the block with a bit of thread locker for extra hold. Clamp-on gas blocks are a simple way to skip the dimpling step entirely.
What kind of accuracy can I expect from this 7.62×39 barrel?
The 7.62×39 isn't a match cartridge, but this barrel punches above the round's reputation. Owners have reported groups in the 1 to 1.5 MOA range off the bench with quality ammunition like Hornady Black. For a rugged, hard-hitting build, that's more than enough performance.



Reviews
There are no reviews yet.