0
0

Lee Precision 7.5×55 Swiss Collet Neck Sizing Die Only (91015)

UPC: 734307910150

$22.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're reloading 7.5×55 Swiss (also known as the 7.5mm Schmidt-Rubin) and you want to squeeze every bit of accuracy and brass life out of your fired cases, Lee's Collet Neck Sizing Die is one of the smartest tools you can have on the bench. Instead of working the entire case body, this die uses a steel collet to press the neck against a hardened precision mandrel. The result is a precisely aligned case neck with minimal bullet run-out, which is exactly what matters when you're chasing consistency out of a K31 or an older Schmidt-Rubin.

How the 7.5×55 Swiss Collet Die Works

The collet design is the whole story here. As you run the press, the collet fingers close around the neck and form it against the mandrel from the outside in. Because the body of the case is left untouched, your brass stays fire-formed to your chamber and the neck tension comes out remarkably uniform from case to case. One nice side benefit is that the die deprimes the case while it sizes the neck, so you knock out that step in the same stroke.

No Case Lube, Longer Brass Life

Since this die only touches the neck, there's no need for case lubrication at all. That means no sticky lube to wipe off afterward and no dented shoulders from over-lubing. It also works the brass far less than a standard full length die, so necks stay softer longer before they need annealing or start to split. Many reloaders find their cases last several times longer going this route.

What to Know Before You Load

This is a neck sizing die, so it's built for brass that has been fired in your own rifle. For that reason it's recommended for bolt action and other manually cycled rifles rather than semi-autos, since the slightly tighter neck fit is ideal for guns you chamber by hand. It uses the standard 7/8 inch by 14 thread, so it drops right into any common single stage or turret press. Note that this is the die only, not a full set, so you'll pair it with a seating die to finish your rounds.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 91015
  • UPC: 734307910150
  • Cartridge: 7.5x55mm Swiss (Schmidt-Rubin)
  • Die Style: Collet Neck Sizing Die
  • Sizing Method: Steel collet with precision mandrel
  • Case Lube: Not required
  • Deprimes Case: Yes, during sizing
  • Thread: 7/8 inch – 14
  • Recommended For: Bolt action and manually cycled rifles
  • Country of Origin: United States

What’s Included

  • Lee 7.5×55 Swiss collet neck sizing die (die only)

Frequently Asked Questions

Does the 7.5×55 Swiss collet die come as a full set?

No, this is the collet neck sizing die only. It does not include a seating die, shell holder, or powder dipper. You'll want to pair it with a bullet seating die to load a complete cartridge.

Do I need case lube with this collet neck sizing die?

No lube needed at all. The collet only sizes the neck and leaves the case body alone, so there's nothing to grab and no lube step required. That keeps your brass cleaner and saves you a bit of time on the bench.

Can I use this die for brass fired in any rifle?

It's recommended for brass that has been fired in your own rifle. Neck sizing leaves the body fire-formed to your chamber, which gives a slightly tighter fit. For that reason it's best suited to bolt action and other manually cycled rifles rather than semi-autos.

Does the collet die deprime the case too?

Yes. It knocks out the spent primer while it sizes the neck in the same stroke, so you handle both jobs at once. The 7/8 inch by 14 thread also means it fits standard single stage and turret presses.

Additional information

UPC

734307910150

Manufacturer

Manufacturer Part Number

91015

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 7.5×55 Swiss Collet Neck Sizing Die Only (91015)”

Related Products