$79.20
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you handload 6mm GT and you're chasing tight groups, the way your bullet gets seated matters just as much as your powder charge. The L.E. Wilson 6mm GT Chamber Type Bullet Seating Die takes a different approach than the dies most folks are used to. Instead of threading into a standard press, this one uses an arbor press or a soft-faced mallet, and the whole round sits inside a chamber machined to mimic your rifle's chamber. Both the case and the bullet are fully captured and aligned before the seating stem ever starts its stroke, which is how you keep runout low and concentricity tight.
The magic here is in the fit. The seating stem and the guide hole are machined to such tight tolerances that the fit is nearly perfect, and some reloaders note you can create a vacuum when you pull the stem out. That snug relationship is what keeps the bullet going in dead straight without the rocking or tilt that can creep in with looser conventional dies. It's a design benchrest shooters have leaned on for generations, and it has since carried over into F-Class, PRS, High Power, and other games where accuracy is everything.
This die is machined from stainless steel for strength and corrosion resistance, so it'll keep running true through thousands of rounds. Seating depth is adjusted through a cap screw, and you can pull the cap and stem to measure with calipers before and after an adjustment to know exactly how much you moved. The included seater base lifts the round above the arbor press plate so the primer never rests against a solid surface, which keeps things safe while you work.
Pair this seater with good brass prep and a quality sizing die and you've got a recipe for seriously consistent ammo. It's a simple tool that does one job extremely well, and once you feel how smooth and repeatable it is, going back to a conventional seater is tough. Made in the USA by a family-owned shop that's been building precision reloading tools since 1927.
No, this is a chamber type die designed to run in an arbor or hand press, and it can also be operated with a soft-faced mallet in a pinch. It does not thread into a conventional 7/8"-14 press like standard dies. Most reloaders pair it with a small arbor press for the smoothest, most repeatable results.
The case and bullet are fully captured inside a chamber that mimics your rifle's chamber, so everything is aligned before the seating stem ever moves. The stem fits the guide hole with extremely tight tolerances, pushing the bullet straight down into the case. That combination keeps runout low and concentricity tight, which is why benchrest and precision shooters trust it.
Seating depth is set using the cap screw on top of the die. You can pull the cap and stem and measure the height with calipers before and after making a change to know exactly how much you moved. Loading a dummy round first is a great way to get your depth dialed in before running live rounds.
The seater base lifts the loaded round up above the arbor press plate during seating. That keeps the primer from resting against a solid surface while you apply pressure, which is an important safety feature. It also helps keep everything positioned correctly for consistent seating.
| UPC | 815145027146 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BS60-GT |
You must be logged in to post a review.
Reviews
There are no reviews yet.