Description
If you shoot 6mm Creedmoor and want to get the most out of your brass, a solid sizing die is where it all starts. This is the Lee Precision 91135, a steel full length sizing die that works the entire case body and neck, returning fired brass to minimum dimensions so it chambers cleanly in any rifle cut for the cartridge. It also deprimes as you run it, knocking out the old primer on the same stroke, and the expander on the decapping rod opens the neck back up to accept your next bullet.
What the 6mm Creedmoor Full Length Sizing Die Does on the Bench
Full length sizing is the workhorse move in rifle reloading. When you fire a round, the brass expands to fit your chamber and doesn't fully spring back, so this die squeezes the body and shoulder back down to spec. That makes it the right call for semi-autos, lever guns, gas guns, and any time you're loading brass that was fired in a different rifle or you've got a mixed range pickup pile. The spent primer gets pushed out through the bottom while the case is up in the die, so sizing and decapping happen together.
Lube Up Before You Run the 91135
This is a steel die, not carbide, so case lube is not optional here. A thin film wiped below the shoulder and a touch inside the neck keeps everything moving smooth and keeps a case from sticking. Lee's own instructions are clear about lubing before you size, and a sparing amount goes a long way. Skip this step and you'll fight stuck cases, so it's worth building into your routine from the first case.
Thread, Build, and Fit
The die uses the industry standard 7/8"-14 thread, so it screws into any common single stage or turret press without adapters or fuss. Lee has been machining and assembling reloading gear in Hartford, Wisconsin since 1958, and their dies have a well earned reputation for doing honest work at a fair price. For a precision cartridge like the 6mm Creedmoor, having a dependable full length sizer in the kit is one of those quiet essentials that keeps your loading rolling.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91135
- UPC: 734307911355
- Cartridge: 6mm Creedmoor
- Die Style: Full Length Sizing Die
- Gun Type: Rifle
- Material: Steel
- Thread Size: 7/8"-14
- Case Lube Required: Yes
- Country of Origin: United States
What’s Included
- 6mm Creedmoor full length sizing die with decapping rod and expander
Frequently Asked Questions
Does the 6mm Creedmoor full length sizing die deprime the case too?
Yes. The decapping rod pushes the spent primer out the bottom of the case while it's up inside the die, so sizing and depriming happen on the same stroke. The expander on that rod also opens the case neck back up so it's ready to seat a new bullet.
Do I need case lube with this Lee 91135 sizing die?
Yes, case lube is required. This is a steel die rather than carbide, so running cases dry can cause them to stick in the die. A thin film wiped below the shoulder and a light touch inside the neck is all it takes, and Lee recommends using lube sparingly.
Will this die fit my reloading press?
It uses the standard 7/8"-14 thread, which is the common size for single stage and turret presses. It threads right in without any adapters, so if you're running a typical press you're good to go.
When should I use a full length sizing die instead of a neck sizer?
Full length sizing works the entire case body and brings brass back to minimum dimensions so it chambers in any rifle cut for 6mm Creedmoor. It's the right choice for mixed or range-pickup brass, semi-autos, and lever guns, or any time the brass wasn't all fired in the same rifle. Neck sizing only touches the neck and is generally reserved for brass fired in your own bolt gun.





Reviews
There are no reviews yet.