Description
When you're running a 6mm Creedmoor and loading your own, a quality sizing die is where good ammo starts. This is the Hornady Custom Grade New Dimension full length sizing die, part number 046254, machined to bring fired brass back down to minimum SAAMI dimensions. It sizes the body, shoulder, and neck in one pass and includes the decapping and expander assembly, so you're knocking out spent primers and setting neck tension in the same stroke.
What Makes This 6mm Creedmoor Die Work
The sizing die carries Hornady's Zip Spindle, a threaded spindle and collet setup that locks the decapping rod in place and stops the slippage that plagued older designs. You can turn it for fine adjustments or zip it up and down for bigger changes, then lock it down without a fight. Paired with that is the elliptical expander, which Hornady runs instead of a traditional ball expander. It glides through the case neck with less friction and less neck stretch, which is easier on your brass and keeps neck tension consistent load after load.
Build Quality You Can Count On
Hornady machines these from case hardened steel with one of the cleaner internal finishes you'll find at this tier, and they back them with a guarantee against breaking or wearing out under normal use. The included Sure-Loc lock ring clamps around the full circumference of the die to hold your setting in place, and the locking screw tightens without chewing up the threads. Reloaders running this die on Creedmoor brass regularly see low runout and reliable shoulder bump, which is exactly what you want when you're chasing tight groups at distance.
Keep in mind this is the single full length sizing die, not a complete two-die set, so you'll pair it with a seater of your choice. The shell holder is also sold separately. If you already have the rest of your 6mm Creedmoor bench squared away and just need a dependable sizer, this one earns its spot.
Key Specifications
- Cartridge: 6mm Creedmoor
- Bullet Diameter: .243
- Die Type: Full Length Sizing Die
- Series: Custom Grade New Dimension
- Number of Dies: 1
- Material: Case Hardened Steel
- Spindle Design: Zip Spindle (threaded)
- Expander: Elliptical Expander
- Lock Ring: Sure-Loc Lock Ring
- Manufacturer: Hornady
- Manufacturer Part Number: 046254
- UPC: 090255462548
- Shipping Weight: 0.505 lbs
What’s Included
- Hornady 6mm Creedmoor full length sizing die
- Zip Spindle decapping assembly with elliptical expander
- Sure-Loc lock ring
Frequently Asked Questions
Is this a complete die set or just the sizing die?
This is the single full length sizing die only, part number 046254. It handles resizing and depriming, but it does not include a bullet seating die. You'll want to add a seater die to complete your 6mm Creedmoor loading setup.
Does the 6mm Creedmoor die come with a shell holder?
No, the shell holder is sold separately. You'll need the correct shell holder sized for the 6mm Creedmoor case head to run this die on your press. Most reloaders already have a compatible holder, since the Creedmoor shares a common head size with several other cartridges.
What is the Zip Spindle and why does it matter?
The Zip Spindle uses a series of light threads on the spindle and collet so the decapping rod locks positively and won't slip during use. You can make fine adjustments by turning it or move it quickly up and down for larger changes. It's a noticeable upgrade over older non-threaded spindle designs.
Will this die work with brass from other 6mm Creedmoor loads?
Yes. As a full length sizer it brings fired brass back down to minimum SAAMI dimensions, resizing the body, shoulder, and neck in one pass regardless of what rifle fired it. That makes it a solid choice if you're loading for multiple 6mm Creedmoor rifles or want cases that chamber reliably across the board.




Reviews
There are no reviews yet.