Description
The Redding Type S (77443) is a step up from your standard full-length sizing die, and it makes a real difference if you care about what your 6mm Creedmoor brass looks like after it comes out of the press. A conventional die sizes the neck based on the thinnest possible brass tolerances, which means most real-world brass ends up getting overworked. The Type S fixes that by putting you in control. You pick the bushing, you set the neck tension, and the die handles the rest: full-length body sizing, shoulder bump, and decapping, all in a single stroke.
How the Redding 6mm Creedmoor Type S Full Length Die Works
The bushing sits inside the die body with a small amount of intentional clearance so it can self-center on the case neck as it enters. That free-floating movement is what keeps the neck concentric to the case body, reducing runout in your finished rounds. The adjustable decapping rod lets you position the bushing higher or lower inside the die, which gives you the option to size only part of the neck length if that fits your prep routine. A standard sizing button and decapping pin retainer are both included, so you have the flexibility to use or skip the expander button depending on whether you sort and turn necks or just shoot off-the-shelf brass. Strip the bushing and internal parts out entirely, and this die converts into a straight body die for bumping shoulders without touching the neck.
Choosing the Right Bushing for Your 6mm Creedmoor Loads
This die ships without a bushing, so you will need to pick one up separately. The standard approach is to measure the outside neck diameter of a loaded round with a micrometer, then subtract .002" to account for spring-back and arrive at your target neck tension. Redding makes bushings in heat-treated steel and with a Titanium Nitride coating, both available in .001" increments. If you are working with consistent premium brass like Lapua or Norma and you have a feel for your neck wall thickness, dialing in the right bushing size is straightforward. For reloaders switching between brass brands or lots, having a couple of bushings on hand is worth it.
The die body is machined from case-hardened steel with industry-standard 7/8"-14 threads, fitting any standard single-stage or turret press. Redding hand-polishes and ultrasonically cleans every die before it ships, and backs the whole thing with a lifetime warranty. For 6mm Creedmoor handloaders who want a single die that handles full-length prep without beating up their brass, this one covers all the bases.
Key Specifications
- Manufacturer: Redding Reloading
- Manufacturer Part Number (MPN): 77443
- UPC: 611760774430
- Caliber: 6mm Creedmoor
- Bullet Diameter: 0.243"
- Die Type: Type S Full Length Bushing Sizing Die
- Die Body Material: Case-hardened steel
- Thread Size: 7/8"-14 (industry standard)
- Bushing Increments: .001" increments
- Standard Shellholder: #1 (Part 11001)
- Bushing Included: No (sold separately)
- Country of Manufacture: United States
- Warranty: Lifetime
What’s Included
- Type S Full Length Bushing Sizing Die body
- Adjustable decapping rod assembly
- Standard sizing button
- Decapping pin retainer
- Decapping pin
Frequently Asked Questions
Does the Redding 6mm Creedmoor Type S Full Length Die come with a bushing?
No, the bushing is sold separately and is required before you can size any brass. Redding makes bushings in .001" increments in both heat-treated steel and Titanium Nitride versions. To find the right bushing, measure the outside neck diameter of a loaded round and subtract .002" for proper neck tension with spring-back accounted for.
What is the difference between this Type S Full Length Die and a standard full-length sizing die?
A standard die sizes the neck to minimum SAAMI tolerances, which usually overworks brass with typical commercial neck wall thicknesses. The Type S uses an interchangeable bushing to size only as much of the neck as you actually need, reducing stress on the brass and giving you control over bullet pull. The self-centering bushing design also helps keep the sized neck more concentric with the case body.
Can this die also function as a body die?
Yes. By removing the bushing and all internal components, the Type S Full Length Die can be used as a body die to resize the case body and bump the shoulder without touching the neck. This is a handy option if you are doing a two-stage prep process with a separate neck sizing die.
What shellholder does the Redding 77443 use?
It uses a standard #1 shellholder, which is Redding part number 11001. The shellholder is sold separately. Redding also makes a Competition Shellholder Set (part 11601) for those who want precise, repeatable shoulder bump control.
Can I size only part of the case neck with this die?
Yes. The adjustable decapping rod lets you raise or lower the bushing position inside the die body, which controls how much of the neck length gets sized. This is useful for reloaders who neck-turn their brass or prefer to size only the bullet-bearing portion of the neck for reduced brass stress.
Will this die fit my reloading press?
Yes, it uses the industry-standard 7/8"-14 thread pattern, so it is compatible with virtually any single-stage, turret, or progressive press that accepts standard rifle dies.



Reviews
There are no reviews yet.