Description
If you reload .243 Winchester, 6mm Creedmoor, 6BR, or any of the growing family of 6mm cartridges, the Redding 6mm Carbide Sizing Button Kit is one of those small upgrades that makes a real difference at the bench. This kit replaces the standard steel expander in your Redding die with a super-hard carbide button that slides through the case neck with far less drag, which means smoother strokes, less effort, and brass that comes out straighter.
The heart of the setup is that carbide button. Carbide is harder and slicker than standard steel, so it reduces friction as it passes back through the neck on the way out. That translates to less neck stretch and less distortion, two things any precision handloader cares about when chasing tight runout and consistent neck tension.
Why Reloaders Reach for the 6mm Carbide Size Button
One of the best parts of the carbide design is that you can skip the inside-neck lubing step that steel buttons usually demand. Less lube to apply and clean off means cleaner brass and a faster workflow, and you still get a smooth pull every time. The button is free floating on the decapping rod, so it self-centers in the case neck as it passes through. That little bit of float helps keep everything concentric and reduces the chance of pulling the neck off-axis.
Fitting the 6mm Carbide Button to Your Redding Dies
This is a drop-in upgrade for Redding Full Length, Neck, and Type S sizing dies, so there is no need to buy a whole new die if you already run Redding gear. The 6mm button is part of Redding's carbide button lineup that covers bottleneck cartridges from .20 all the way up through .375 caliber, and it carries part number 48242 for the 6mm/.243 version. Installation is straightforward, and once it is in place your sizing routine stays the same, just smoother.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 48242
- UPC: 611760482427
- Caliber: .243 / 6mm
- Button Material: Carbide
- Design: Free-floating, self-centering on decapping rod
- Compatibility: Redding Full Length, Neck, and Type S sizing dies
- Lubrication Required: No inside-neck lube needed
- Country of Origin: United States
What’s Included
- Carbide size button (6mm/.243)
- Retainer
- Spare decapping pin
Frequently Asked Questions
What does the 6mm carbide sizing button actually do?
It replaces the standard steel expander button in your sizing die with a harder, slicker carbide version. As the button passes back through the case neck, the carbide reduces friction and drag, which means smoother strokes and less neck stretch and distortion. The end result is straighter brass with more consistent neck tension.
Will this fit my Redding dies?
Yes. The 6mm carbide button is designed to upgrade Redding Full Length, Neck, and Type S sizing dies. If you already run Redding sizing gear in .243 or 6mm, this is a simple drop-in swap rather than buying a whole new die.
Do I still need to lube the inside of the case neck?
No. One of the main perks of the carbide button is that it makes inside-neck sizing smooth enough that you can skip the neck lube step. That keeps your brass cleaner and speeds up your reloading workflow.
What comes in the kit?
The kit includes the 6mm carbide size button, a retainer, and a spare decapping pin. The button is free floating on the decapping rod so it self-centers in the case neck as it works.





Reviews
There are no reviews yet.