$79.20
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson chamber type bullet seating die has been a go-to for precision handloaders for decades, and this one is cut for the 6mm BRA. Instead of threading into a standard press like a conventional 7/8"-14 die, it works with an arbor press or a mallet, giving you a slow, controlled feel as the bullet goes home. That hands-on approach is a big part of why benchrest and long range crowds swear by Wilson dies.
The magic is in the chamber type design. The case and bullet are fully captured inside a precisely machined cavity before anything moves, so both are held in perfect alignment the instant the close-fitting seating stem pushes the bullet straight into the case mouth. That dual-capture setup takes the rocking and tilting out of the equation, which is exactly what you fight against with looser conventional dies. The payoff shows up on your concentricity gauge as low runout and consistent bullet alignment.
Depth adjustments are made by turning the screw inside the cap, which runs 3/8"-24 TPI threads for fine, controllable changes. Dial in your seating depth, lock it in, and you get repeatable results across a loading session. It is a straightforward system with no fuss, and once you find the sweet spot for your bullet and chamber, getting back to it is simple.
This die is aimed squarely at folks loading match ammo for competition or precision rifle work in 6mm BRA, the Ackley-style improved version of the 6mm BR. Reloaders consistently point to the accuracy and the clean, repeatable seating these dies deliver. Made in the USA and built to run through thousands of rounds, it is the kind of tool you buy once and keep on the bench for the long haul.
No, this is a hand die designed for use with an arbor press or a mallet. It does not thread into a conventional 7/8"-14 press. Most precision reloaders pair it with a dedicated arbor press for the best feel and control.
The chamber type design fully captures both the case and the bullet before seating begins, holding them in alignment as the close-fitting stem pushes the bullet straight into the case mouth. This eliminates the rocking and tilting that can happen in looser conventional dies. The result is lower runout and more consistent seating, which is why benchrest shooters favor these.
Seating depth is set by turning the screw inside the cap, which uses 3/8"-24 TPI threads for fine control. Once you dial in your preferred depth for a given bullet, it returns to that setting easily. For even finer, repeatable adjustments some reloaders prefer the micrometer-top version, but this standard cap setup handles precise seating well.
Correct, this die is cut for the 6mm BRA, which is the Ackley-style improved version of the 6mm BR with the sharper shoulder. If you are loading standard 6mm BR brass, you will want the matching 6mm BR seater instead. Matching the die to your exact chambering is key to getting proper fit and alignment.
| UPC | 815145027115 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BS60-BRA |
You must be logged in to post a review.
Reviews
There are no reviews yet.