Description
Forster built its reputation on dies that produce dead-straight ammo, and this 6mm BR Full Length set carries that tradition. It bundles the Forster Bench Rest Full Length Sizing Die with the Bench Rest Seater Die, a combination that's a smart starting point for anyone loading the 6mm BR Remington for bolt-action or single-shot rifles. Each die is machined from quality steel to tight tolerances and hand polished before and after heat treating, which is a big part of why these turn out such consistent brass.
What the 6mm BR Die Set Actually Does
The full length sizer works the neck, shoulder, and body of the case, sets your headspace, deprimes, and expands the neck in one stroke. That means your brass drops back into a minimum-spec chamber with no fuss, which is what you want for reliable feeding and good case life. Forster's exclusive elevated E-Z expander ball rides higher in the die so the case and neck stay aligned as the ball passes through, cutting down on the runout that creeps in with lesser designs.
Why Reloaders Reach for the Forster Bench Rest Seater
This is the die that made Forster famous. The sliding die chamber holds the bullet, case, and seating stem in the same close-fitting space through the entire seating stroke, so everything stays coaxial. The non-crimping seating stem is cut just slightly larger than bullet diameter, which keeps bullets going in straight and your seating depth repeatable round after round. For a cartridge like the 6mm BR that lives and dies on accuracy, that kind of alignment is exactly what separates a good load from a great one.
Fits Your Press and Your Bench
The set includes two cross-bolt lock rings and ships in a sturdy Forster die box that keeps everything organized. If you're running a Forster Co-Ax press, no shellholder is needed; with any other brand of press, just use the shellholder your press maker recommends. The seater adapts to most standard presses, so this set drops right into just about any bench setup for the 6mm BR.
Key Specifications
- Manufacturer: Forster Products
- Caliber: 6mm BR Remington
- Die Type: Full Length Sizing Die and Bench Rest Seater Die
- Set Configuration: 2-Die Set
- Material: Hand-polished, heat-treated steel
- Seater Style: Non-crimping straight-line Bench Rest seater
- Expander: Elevated E-Z case neck expander
- Lock Rings: Cross-bolt die locking rings included
- Manufacturer Part Number: 004181
- UPC: 757253000300
- Shipping Weight: 1.6 lbs
What’s Included
- Forster Bench Rest Full Length Sizing Die (with decapping/expander unit)
- Forster Bench Rest Seater Die
- 2 cross-bolt lock rings
- Forster die storage box
Frequently Asked Questions
What dies come in the Forster 6mm BR die set?
The set includes the Forster Bench Rest Full Length Sizing Die and the Bench Rest Seater Die. The sizer handles the neck, shoulder, and body while depriming and expanding the neck, and the seater delivers straight-line, non-crimping bullet seating. Both ship with cross-bolt lock rings in a Forster die box.
Does the 6mm BR die set include a shellholder?
No, a shellholder is not included in this set. If you're using a Forster Co-Ax press you won't need one at all, since those presses don't use shellholders. With any other press, just pick up the shellholder your press manufacturer recommends for the 6mm BR Remington.
Will this Forster set work in my regular reloading press?
Yes. The seater die adapts to most standard reloading presses, and the dies use common 7/8-14 threading found on typical single-stage and turret presses. Pair it with the correct shellholder for your press and you're set.
Is the Forster Bench Rest seater good for precision loads?
It's one of the most respected seaters in the game. The sliding die chamber keeps the bullet, case, and stem aligned through the whole seating stroke for very low runout, which matters a lot with an accuracy-focused cartridge like the 6mm BR. Reloaders consistently praise the quality of the finished rounds these dies produce.



Reviews
There are no reviews yet.