0
0

Forster 6mm BR Bushing Bump Neck Sizing Die (BBD3301)

UPC: 757253998928

$72.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Bushing Bump Neck Sizing Die for 6mm BR is built for handloaders who care about consistency round after round. Instead of full-length sizing the whole case, it sizes only the neck based on the bushing you install and bumps the shoulder back a controlled amount to set your headspace. That means the fire-formed body of your brass keeps its glove-fit to your chamber, which is a big part of why this cartridge is such a favorite among benchrest and precision crowds. It also deprimes in the same stroke, so you're not adding steps to your routine.

What Makes the 6mm BR Bushing Bump Die Different

Most sizing dies either work the whole case or leave you fighting sticky bolt lift from neck-only sizing. This one splits the difference. The neck gets sized by an interchangeable bushing while the shoulder gets bumped just enough for smooth, repeatable chambering. Forster offers bushings in .001 inch increments across a huge range, so you can tune neck tension precisely for your brass and bullet combo. Keep in mind the bushings are sold separately, and this die only accepts Forster bushings, not Redding or Wilson.

Choosing a Bushing for the Bushing Bump Neck Die

The common starting point is to measure the outside neck diameter of a loaded round and go about .002 inch under that for a solid grip on the bullet. If you want more tension, drop another .001 inch. One thing worth knowing: this die uses a decapping assembly without an expander ball, so the bushing alone determines your inside neck diameter. If your neck wall thickness varies, turning your necks first will give you the most consistent tension and the straightest results.

Build and Fit

The die is machined from hardened steel with a polished interior for smooth sizing, and it's made in the USA. It threads into any standard 7/8-14 press. Running it in a Forster Co-Ax press means you won't need a shell holder, while any other press just uses the shell holder the press maker recommends.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: BBD3301
  • UPC: 757253998928
  • Caliber: 6mm BR Remington
  • Die Type: Bushing Bump Neck Sizing Die
  • Press Thread: 7/8-14
  • Bushing Increments: 0.001 inch
  • Bushing Compatibility: Forster bushings only
  • Material: Hardened steel, polished interior
  • Expander Ball: Not included; bushing sets neck diameter
  • Country of Origin: USA

What’s Included

  • One Forster 6mm BR Bushing Bump Neck Sizing Die
  • Decapping assembly
  • Complete instructions

Frequently Asked Questions

Does the 6mm BR Bushing Bump Neck Die come with bushings?

No, bushings are sold separately with this version of the die. It includes the die body, a decapping assembly, and instructions. If you want bushings in the box, Forster offers a kit version that comes with three pre-selected sizes.

What bushing size should I start with for 6mm BR?

A good starting point is to measure the outside neck diameter of a loaded round and choose a bushing about .002 inch smaller for roughly .002 inch of neck tension. If you want a firmer grip, subtract .003 inch instead. Since the die has no expander ball, the bushing alone sets your inside neck diameter, so consistent neck wall thickness matters.

Will this die work with Redding or Wilson bushings?

No, the Forster Bushing Bump Neck Die only accepts Forster bushings. Redding and Wilson bushings are not compatible. Forster offers over 90 bushing sizes in .001 inch increments, so you have plenty of options to dial in tension.

How is this different from a full-length sizing die?

A full-length die resizes the entire case body along with the neck, while this die sizes only the neck and bumps the shoulder back a controlled amount. That leaves the fire-formed body matched to your chamber, which helps with concentricity and brass life. It's a popular choice for precision shooting where consistency is the priority.

Additional information

UPC

757253998928

Manufacturer

Manufacturer Part Number

BBD3301

Reviews

There are no reviews yet.

Be the first to review “Forster 6mm BR Bushing Bump Neck Sizing Die (BBD3301)”