$135.00
18 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're building precision loads for a 6mm ARC and you're tired of sorting and culling mediocre brass, Alpha Munitions makes life a whole lot easier. This is 100 count of American-made 6mm ARC brass with small rifle primer pockets, built around Alpha's Optimized Case Design technology. The 6mm ARC itself was designed by Hornady to run in the AR-15 platform while delivering flat-shooting, low-recoil performance out past 1,000 yards, and brass this consistent helps you get the most out of the cartridge.
Alpha approaches brass like a lab project. Every case goes through a demanding inspection process using custom machines with high-resolution cameras and sensors that 3D map the brass and check key dimensions down to microns. The payoff shows up at the bench: concentric necks, clean flash holes, and weight spreads that stay impressively tight across the box. That translates to more uniform case capacity, which is exactly what you want when you're chasing low standard deviations and small groups.
The Optimized Case Design, along with Alpha's optimized case head, is engineered to lengthen primer pocket life and overall case life even when you're running hotter loads and higher velocities. Independent torture testing on Alpha brass in other calibers has shown it holding primer pockets at pressures where ordinary brass would have given up well before. The small rifle primer pocket is a big part of the appeal here, since a lot of serious handloaders favor small primers for their consistency and durability under pressure.
This brass uses the traditional 0.080 inch (2.03mm) flash hole, so your standard decapping and sizing dies will work without needing a small-diameter pin. One thing worth knowing: Alpha's primer pockets run tight and the pocket corners are slightly beveled, so plan on a firm, deliberate seat when priming. It's a sign of a quality pocket, not a problem. The cases arrive in a reusable hard plastic box with perforated bi-layer foam, which doubles nicely as storage for your finished loads.
It ships unprimed and new, ready for your reloading process. The pockets are sized for small rifle primers, so you'll add your primer of choice when you build your loads. This gives you full control over your load development.
Many precision handloaders prefer small rifle primers for their consistent ignition, lower standard deviations, and better durability under higher pressures. The 6mm ARC is designed around a small rifle primer pocket to begin with. Alpha's optimized case head is built to stretch primer pocket life even when you're pushing warmer loads.
This brass uses the traditional 0.080 inch (2.03mm) flash hole. That means your standard decapping and sizing dies will work fine without needing a small-diameter decapping pin. No special tooling required to get started.
Yes, Alpha pockets are known to run tight with slightly beveled corners, which is a mark of precise, consistent manufacturing. Plan on a firm, deliberate seat, especially with a hand primer. Some reloaders find certain primer brands seat a touch easier if you want the smoothest feel.
| UPC | 616612670427 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AM6 ARC |
| Quantity | 100 |
You must be logged in to post a review.
Reviews
There are no reviews yet.