0
0

Forster 6mm ARC Ultra Micrometer Seater Die (U00041)

UPC: 757253990939

$118.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster built its reputation on seater dies that hold everything in line, and the 6mm ARC Ultra Micrometer version is the top of that family. Instead of just gripping the case neck, a spring-loaded sliding chamber sleeve captures the sized case for its full length before the bullet ever starts moving. The bullet, case, and seating stem all ride on a common axis, which is exactly what you want when you are chasing low runout and tight groups out of a 6mm ARC.

What the Micrometer on This 6mm ARC Die Gets You

The micrometer head is where this die earns its keep. Gradations are marked at .001 inch and you can fine-tune down to .0005 inch in either direction, so adjustments are precise and repeatable. The white markings are bright and easy to read, which makes recording a setting and dialing right back to it a non-issue when you switch bullets or come back to a load later. It takes most of the guesswork out of finding your lands and locking in a seating depth you trust.

Fit and Function of the 6mm ARC Ultra Seater

This is a non-crimping seater, so the bullet and case stay in perfect alignment while the bullet is press-fit to depth. It threads into standard 7/8-14 presses, and if you run a Forster Co-Ax you can skip the shellholder entirely. One thing worth knowing: the body on these Ultra dies is a bit beefier than a standard die, so a few folks with certain Co-Ax setups have had to work around clearance. For most single-stage presses it drops right in.

Built to Last in the 6mm ARC

Forster makes these in the U.S.A., and the fit between the sleeve, body, and stem is tight and precise the way a match die should be. If you are loading 6mm ARC for an AR platform or a bolt gun and want ammo that shoots consistently, this is the seater that helps you get there without the trial and error.

Key Specifications

  • Manufacturer: Forster Products
  • Caliber: 6mm ARC
  • Die Type: Ultra Micrometer Bullet Seating Die
  • Crimp: Non-crimping
  • Micrometer Adjustment: Adjustable to .0005 inch
  • Gradations: .001 inch increments
  • Alignment Feature: Spring-loaded floating chamber sleeve
  • Thread: 7/8-14
  • Country of Origin: Made in the U.S.A.
  • Manufacturer Part Number: U00041
  • UPC: 757253990939

What’s Included

  • One Forster Bench Rest Ultra Micrometer Seater Die (6mm ARC)
  • One Forster split-type lock ring
  • Storage case
  • Instructions

Frequently Asked Questions

What makes the Forster 6mm ARC Ultra Micrometer Seater Die different from a standard seater?

The big difference is the floating chamber sleeve that fully supports the sized case rather than just the neck or rim. That full-length support holds the bullet, case, and seating stem on the same axis for straighter, lower-runout seating. Add the micrometer head for precise depth control and you have a die aimed at match-grade consistency.

How fine can I adjust seating depth with this die?

The micrometer is marked in .001 inch gradations and lets you fine-tune to .0005 inch in either direction. Many handloaders report they can nudge it even finer by feel between the marks. Once you find a setting you like, write it down and dial right back to it anytime.

Does the Forster 6mm ARC Ultra Micrometer Seater Die crimp the case?

No, this is a non-crimping seater. It press-fits the bullet to depth while keeping everything in alignment, which is what precision loaders want. If you need a crimp, you would add a separate crimp die to your process.

Will this die work in my press?

It uses the standard 7/8-14 thread, so it fits common single-stage presses. In a Forster Co-Ax you do not need a shellholder since the press holds the case for you. Keep in mind the Ultra body runs a touch larger than a standard die, so a few Co-Ax users have had to account for clearance.

Additional information

UPC

757253990939

Manufacturer

Manufacturer Part Number

U00041

Reviews

There are no reviews yet.

Be the first to review “Forster 6mm ARC Ultra Micrometer Seater Die (U00041)”