Description
If you load 6mm ARC and care about concentric, repeatable ammo, the Forster Bench Rest Seater Die is one of the easiest upgrades you can make to your bench. Forster invented the straight-line seating die, and this is the design that earned the reputation. Instead of relying on the case neck and bullet alone, it uses a sliding die chamber that wraps the entire outside of your sized case and brings the bullet, case, and seating stem into alignment before any pressure is applied. The result is ammo that runs true and groups the way it should.
What Sets the 6mm ARC Bench Rest Seater Die Apart
The heart of this die is that close-fitting, cartridge-specific chamber machined with a one-piece reamer. It holds the case snug and square so the bullet can't tip as it starts into the neck, which is exactly where a lot of runout sneaks in with standard seaters. The hand-polished seating stem has been refined over the years to play nice with modern ballistic tip and VLD-style bullets, so you're not fighting marred meplats or inconsistent contact. It's a non-crimping seater, which keeps the focus on accuracy and clean, consistent seating depth.
Build Quality You Can Feel in the 6mm ARC Seater Die
Forster machines these dies from quality steel to tight tolerances, then hand polishes before and after heat treating for a smooth finish. Every die uses the Forster Cross Bolt lock ring, which pinches the split ring closed rather than digging a set screw into the die threads, so your settings stay put and the body doesn't get chewed up. Reloaders routinely report runout in the one-thousandth range with these dies, and plenty of folks who've run Redding and other brands keep coming back to Forster.
It threads into most standard 7/8-14 presses and really shines paired with a Forster Co-Ax, though it works great in any press you already own. Dial in your seating depth, lock the ring, and you've got a setup that produces straight 6mm ARC rounds load after load.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 5947
- UPC: 757253990946
- Cartridge: 6mm ARC
- Die Style: Bullet Seating Die
- Die Type: Bench Rest Straight-Line Seater (non-micrometer)
- Seating Style: Non-crimping
- Diameter: 0.875 in
- Thread: 7/8-14 (fits standard presses)
- Lock Ring: Forster Cross Bolt split lock ring
- Country of Origin: Made in the U.S.A.
What’s Included
- One Forster Bench Rest Seater Die
- One hand-polished seating stem
- Cross Bolt split lock ring
- Instructions
- Die box
Frequently Asked Questions
Does the 6mm ARC Bench Rest Seater Die have a micrometer adjustment?
No, this is the standard Bench Rest Seater Die, which adjusts the seating depth with a threaded, knurled stem rather than a micrometer dial. It uses the same straight-line seating chamber and delivers the same precision as the micrometer version. If you want a repeatable numbered dial for swapping between multiple bullets, Forster also offers the Ultra Micrometer version of this die separately.
What makes this Forster seater produce straighter ammo than a standard die?
The die uses a sliding chamber that captures the entire outside of your sized case before the bullet starts to seat. That full support keeps the case, bullet, and seating stem aligned during the critical moment when the bullet first contacts the case mouth, which is where tipping and runout usually happen. Many reloaders see runout in the one-thousandth range with these dies.
Will the 6mm ARC Bench Rest Seater Die work in my press?
Yes. It uses standard 7/8-14 threads and adapts to most common reloading presses. It pairs especially well with a Forster Co-Ax press, but you don't need one to get excellent results.
Do I need a shellholder with this seater die?
If you're running a conventional press, you'll use the correct shellholder for the 6mm ARC case head, which is sold separately. A shellholder isn't required if you're using a Forster Co-Ax press, since it uses its own jaw system instead.




Reviews
There are no reviews yet.