Description
This Forster die handles two of the most important jobs in precision reloading at the same time. It sizes the case neck using an interchangeable bushing so you dial in exactly the neck tension you want, and it bumps the shoulder back just enough to set correct headspace for smooth chambering. What it leaves alone is the body of the case, which keeps that fire-formed fit to your chamber intact. For 6 Creedmoor shooters running fire-formed brass, that combination is the sweet spot between a full-length die and a neck-only die.
What the 6 Creedmoor Bushing Bump Neck Die Does Differently
Traditional setups force a choice between full-length sizing and neck-only sizing, each with its own tradeoffs. This design sidesteps that. The one-step operation reduces the neck and bumps the shoulder together, which keeps necks running straight and concentric while preventing you from overworking the brass. Less working of the metal means less case stretch, fewer annealing headaches, and more firings out of a batch of good 6 Creedmoor brass. The decapping assembly deprimes at the same time, and it runs without an expander ball so your bushing choice alone determines the internal neck diameter.
Choosing Bushings for the Forster 6 Creedmoor Die
Worth knowing up front: this is the die by itself, and bushings are sold separately. It only accepts Forster neck bushings, so Redding and Wilson bushings will not fit. Forster offers them in .001 inch increments so you can fine-tune for your exact brass neck wall thickness. A good starting point is a bushing roughly .002 inch smaller than a loaded round measures at the case neck, then adjust from there based on how your rifle shoots.
The interior is machined and hand-polished for smooth, consistent sizing, and like the rest of the Forster lineup it's made in the U.S.A. If you reload for a 6 Creedmoor and you're serious about repeatable neck tension and extending brass life, this die earns its spot on the bench.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BBD3281
- UPC: 757253991608
- Cartridge: 6mm Creedmoor
- Die Style: Bushing Bump Neck Sizing Die
- Bushing Compatibility: Forster neck bushings only
- Bushing Increments: .001 inch
- Decapping Assembly: Included, no expander ball
- Bushings Included: No, sold separately
- Country of Origin: Made in the U.S.A.
What’s Included
- One Forster 6 Creedmoor Bushing Bump Neck Sizing Die (BBD3281)
- Decapping assembly
- Instructions
Frequently Asked Questions
Does the 6 Creedmoor Bushing Bump Neck Die come with bushings?
No, this is the die only and neck bushings are sold separately. You'll want to pick up the Forster bushing size that matches your brass before you can start sizing. If you'd rather have them included from the start, Forster also offers a kit version that comes with three pre-selected bushings.
Will Redding or Wilson bushings work in this Forster die?
No. This die is built to use Forster neck bushings only, so bushings from Redding or Wilson will not fit. Forster offers their bushings in .001 inch increments so you can match your brass neck wall thickness precisely.
What bushing size should I start with for 6 Creedmoor?
A solid starting point is a bushing about .002 inch smaller than a loaded round measures at the case neck. Measure a loaded cartridge with calipers, subtract .002, and order from there. Since Forster offers .001 inch steps, you can fine-tune neck tension up or down once you see how your rifle groups.
How is a bushing bump die different from a full-length or neck-only die?
A full-length die works the whole case body, while a neck-only die leaves the shoulder alone. This bushing bump die sizes the neck and bumps the shoulder back for proper headspace in one step without touching the body, so your brass keeps its fire-formed fit to the chamber. That reduces how hard the brass gets worked and helps extend case life.


Reviews
There are no reviews yet.