Description
Anyone chasing tight groups out of their 6.8 Western knows that seating depth is where a lot of the magic happens, and this die makes dialing it in about as easy as it gets. The micrometer thimble reads in one-thousandth-of-an-inch increments, just like a depth micrometer, so you can make fine changes, write the number down, and come right back to it later without guessing. The adjustment is smooth with no clicks, and once you set it, it holds its place batch after batch.
What the Floating Bullet Guide Does for Your 6.8 Western Loads
The heart of this seating die is the floating bullet guide. It holds the case mouth and bullet in perfect alignment and has a little radial clearance so everything self-centers on the seater screw before the bullet ever starts into the neck. The result is cartridges with very low runout, which is exactly what you want when you are trying to shrink your groups. The seating stem itself is machined and burnished to handle nearly any bullet nose shape, from flat points to long VLD-style projectiles, without leaving a mark on the tip.
Dead Length Seating and a Clever Convertible Guide
Run as a dead length seater, the die body contacts the shell holder so your seating depth stays consistent from the first round to the last. The floating bullet guide is also reversible, an exclusive Lee touch, so you can unthread it and flip it to seat and crimp in one operation if that fits your workflow better. It is made in the USA and carries Lee's lifetime guarantee, which is a nice safety net on a tool that earns its keep on the bench.
This is a single-caliber seating die cut specifically for 6.8 Western. If you are after factory-grade precision without spending big money on a high-dollar competitor die, this one punches well above its weight and has become a favorite among folks loading everything from hunting rounds to match ammo.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92340
- UPC: 734307923402
- Caliber: 6.8 Western
- Die Type: Precision Micrometer Bullet Seating Die
- Seating Style: Dead length seating
- Micrometer Graduations: 0.001 inch increments
- Bullet Guide: Floating, reversible for seat and crimp
- Seating Stem: Machined and burnished for mark-free seating
- Country of Origin: Made in the USA
- Warranty: Lee lifetime guarantee
- Shipping Weight: 0.56 lbs
What’s Included
- 6.8 Western Precision Micrometer Bullet Seating Die
- Instructions
Frequently Asked Questions
Does this 6.8 Western micrometer die come as a full set or just the seating die?
This is a single bullet seating die for 6.8 Western, not a complete set. You will still need a sizing die and the correct shell holder to load a finished round. Lee sells those separately, or you can step up to one of their micrometer die sets if you want everything together.
Can the Lee micrometer seating die seat and crimp at the same time?
Yes. The floating bullet guide is reversible, so you can unthread it and flip it to seat and crimp in one operation. If you prefer to keep those steps separate, just leave the guide in its standard orientation for seating only.
Will it damage the tip of my bullets?
No. The seating stem is machined and burnished to fit nearly any bullet nose shape, including long VLD and polymer-tip projectiles, without marking or deforming the point. The floating guide also helps everything line up straight before the bullet enters the case neck.
How precise is the micrometer adjustment on this die?
The thimble and body are laser engraved in one-thousandth-of-an-inch divisions and read just like a depth micrometer. The adjustment is smooth with no detents, so you can make fine changes, record your setting, and return to it accurately on your next loading session.





Reviews
There are no reviews yet.