0
0

Redding 6.5×55 Swedish Mauser Body Die – 75132

UPC: 611760751325

$42.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Body Die for 6.5×55 Swedish Mauser does one job and does it cleanly: it full length resizes the case body and bumps the shoulder back to proper headspace without ever touching the neck. That sounds simple, but it's a big deal for precision handloaders. If you neck size to chase accuracy and case life, you'll eventually hit the point where your brass gets a little stiff to chamber after repeated firings. This die is the answer, letting you reset the body and shoulder without undoing all that careful neck work.

How the 6.5×55 Swedish Mauser Body Die Fits Your Loading Bench

This die is built without any internal parts, so there's no decapping rod and no neck sizing happening. It pairs naturally with a bushing style neck die like Redding's Type S Neck or Competition Neck die, keeping your body sizing and neck sizing as two separate, controllable steps. A lot of folks find that splitting those operations gives them straighter rounds with less runout and more consistent neck tension round to round. You set the amount of shoulder bump by adjusting the die's position relative to the shellholder, and a headspace or datum gauge makes dialing in that .002 bump a lot easier than guessing.

Build and Fit of the Redding 6.5×55 Body Die

Redding machines these dies from steel to tight tolerances, and this one uses standard 7/8-14 threads so it drops into any common single stage or turret press. It takes the standard #7 shellholder for the 6.5×55 cartridge. The die ships with its lock ring already installed and comes tucked in a plastic storage case to keep it protected on the shelf. Made in the USA, it's the kind of tool that earns its keep load after load.

The 6.5×55 Swedish is a cartridge with real history and a loyal following, prized for its long, efficient 6.5mm bullets and mild recoil. If you're reloading for a vintage Swedish Mauser or a modern bolt gun, a dedicated body die is one of the smarter additions you can make to a precision 6.5×55 die setup.

Key Specifications

  • Manufacturer: Redding
  • Cartridge: 6.5x55mm Swedish Mauser
  • Die Type: Body Die
  • Manufacturer Part Number: 75132
  • UPC: 611760751325
  • Thread Size: 7/8-14
  • Shellholder: #7 (sold separately)
  • Material: Steel
  • Bullet Diameter: 0.264"
  • Country of Manufacture: United States
  • Shipping Weight: 0.4 lb

What’s Included

  • One Redding 6.5×55 Swedish Mauser Body Die with lock ring installed
  • Plastic storage case
  • Instructions

Frequently Asked Questions

Does the 6.5×55 Swedish Mauser Body Die size the neck?

No, it does not. This die full length resizes the case body and bumps the shoulder back for proper chambering while leaving the neck completely untouched. That's exactly why handloaders pair it with a separate neck sizing die, so each step can be controlled independently.

Can the Redding body die bump the shoulder on 6.5×55 brass?

Yes. Bumping the shoulder back is one of its main purposes. You control the amount of bump by adjusting the die's height relative to the shellholder, and most reloaders aim for around .002 inches of setback for easy chambering. A headspace comparator or datum gauge makes getting that measurement repeatable.

Does this die deprime the case?

No, it has no decapping rod or internal parts, so it won't knock out spent primers. You'll need to handle depriming with a separate decapping tool or your neck sizing die. This bare bones design is part of what keeps the body sizing operation clean and consistent.

What shellholder do I need for the 6.5×55 body die?

The 6.5×55 Swedish uses the standard #7 shellholder, which is sold separately. The die itself uses standard 7/8-14 threads, so it fits any common single stage or turret reloading press without any trouble.

Additional information

UPC

611760751325

Manufacturer

Manufacturer Part Number

75132

Shipping Weight

0.4

Reviews

There are no reviews yet.

Be the first to review “Redding 6.5×55 Swedish Mauser Body Die – 75132”