Description
The Forster 6.5x55mm Swede GO Headspace Gauge is the tool you reach for when you need to know your rifle's chamber is right. Headspace is the distance between the bolt face and the datum line on the shoulder of a rimless case, and getting it correct is what keeps a rifle both safe and accurate. This GO gauge represents the minimum chamber dimension, so when your bolt closes cleanly on it, you know the chamber will accept ammunition loaded to maximum SAAMI specs.
What the 6.5×55 GO Gauge Tells You
A GO gauge is the first check anyone should run when finish-chambering a fresh barrel. If the bolt closes on it, the reamer went deep enough to accept factory ammo without the chamber being sloppy. It's also worth running on a surplus or used 6.5×55 Swede before firing it, since an old rifle with tired headspace can be a real problem. Pair it with a NO-GO or Field gauge and you've got the full picture of where your chamber stands.
Built the Way Forster Builds Everything
Forster machines these gauges from A2 tool steel and holds them to tolerances within a couple ten-thousandths of an inch, then precision grinds them to ANSI and SAAMI dimensions. That's the kind of consistency that makes gunsmiths trust them, and it's why they've been a shop-standard for decades. This is a rimless gauge cut specifically for the 6.5×55 Swedish Mauser, measuring right around 1.783 inches, so there's no guessing about fit.
Whether you're a home gunsmith setting up a new barrel or just want peace of mind before you shoot that milsurp Swede you picked up, this is a straightforward piece of gear that does exactly one job and does it dead-on. Add a set of feeler gauges and you can even measure how much room your chamber has past the GO dimension.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG6555G
- UPC: 757253004667
- Cartridge: 6.5x55mm Swedish Mauser
- Gauge Style: GO
- Case Type: Rimless
- Material: Hardened A2 Tool Steel
- Finish: Precision Ground Steel
- Standard: SAAMI Dimensioned
- Length: 1.783 in
- Country of Manufacture: United States
- Quantity: 1
What’s Included
- One Forster 6.5x55mm Swede GO headspace gauge (HG6555G)
Frequently Asked Questions
What does the 6.5×55 GO gauge actually check?
The GO gauge represents the minimum chamber dimension for the 6.5×55 Swedish Mauser. When your bolt closes on it, the chamber is long enough to accept ammunition loaded to maximum SAAMI specifications. It's the baseline check for a properly cut, safe, and tight chamber.
Do I need a NO-GO or Field gauge along with this GO gauge?
For finish-chambering a barrel, the GO gauge is the essential starting point. A NO-GO or Field gauge tells you the upper end of your headspace, so running the pair gives you the complete picture. Many gunsmiths keep both on hand to fully verify a chamber before firing.
Is this gauge for the rimless 6.5×55 Swedish Mauser?
Yes, it's cut specifically for the rimless 6.5x55mm Swede and dimensioned to SAAMI standards. Headspace on this cartridge is measured from the bolt face to the datum line on the case shoulder. The gauge measures right around 1.783 inches for a precise fit.
What is the Forster gauge made from?
Forster machines these from A2 tool steel and holds them to tolerances within roughly a couple ten-thousandths of an inch. They're then precision ground to ANSI and SAAMI dimensions. That level of consistency is why they've long been a trusted choice among gunsmiths.




Reviews
There are no reviews yet.