Description
The Redding Competition Bushing Neck Die Set for 6.5×55 Swedish Mauser is about as refined as rifle dies get. This is a three-die package built for the handloader who sorts brass, tracks their loads, and wants ammo that comes out straight every time. You get a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Seating Die, with micrometer adjustment on both the neck sizer and the seater. If you've been running a standard set and keep wishing you had finer control, this is the jump a lot of folks make for their favorite rifle.
What Sets the 6.5×55 Competition Bushing Neck Die Set Apart
The magic is in the sliding sleeve. On both competition dies, the case is captured and aligned inside a close-fitting, precision ground sleeve before any sizing or seating happens. The resizing bushing self-centers on the case neck, and the decapping rod stays aligned using the die's internal parts as a linear support, a lot like a firing pin. The result is very low neck runout and seating consistency that shows up on paper. Because it's a bushing design, you pick your own neck tension by swapping bushings in .001 inch steps.
Dialing In Loads With the Redding Competition Seater
Both the neck sizing die and the seating die use a micrometer head calibrated in .001 inch increments, so you can record a setting, change bullets, and dial right back to your sweet spot. The seating stem on the competition seater is fit so precisely it practically floats, which is a big part of why these turn out such straight ammo. Keep in mind the competition seater isn't meant for compressed loads, so match it to the kind of loads you're building.
Rounding Out the Set With the Body Die
Since this is a neck sizing setup, the included Body Die handles full length work on the case body and bumps the shoulder back without touching the neck. It's there for when cases get tight to chamber after several firings. A couple quick notes before you order: neck bushings are sold separately so you can choose your tension, and the shellholder (standard #7) isn't included either. Grab those alongside the set and you'll be loading match-grade 6.5×55 in no time.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 58132
- UPC: 611760581328
- Caliber: 6.5x55mm Swedish Mauser
- Die Set Type: Competition Bushing Neck Sizing
- Number of Dies: 3
- Dies Included: Competition Bushing Neck Sizing Die, Body Die, Competition Seating Die
- Adjustment: Micrometer on neck sizing and seating dies, .001" increments
- Thread Size: 7/8"-14
- Standard Shellholder: #7 (sold separately)
- Neck Bushings: Sold separately
- Country of Origin: United States
What’s Included
- Competition Bushing Neck Sizing Die
- Body Die
- Competition Seating Die
- Die storage box
- Instructions
Frequently Asked Questions
Do neck bushings come with the 6.5×55 Competition Bushing Neck Die Set?
No, neck bushings are sold separately. This lets you choose the exact bushing size for the neck tension you want, since the right bushing depends on your brass thickness and loading preferences. You'll want to measure a loaded round's neck diameter and pick a bushing a thousandth or two under that.
Is a shellholder included with this die set?
No, the shellholder is not included. The 6.5×55 Swedish uses a standard #7 shellholder, which you'll need to pick up separately. Redding also offers a competition shellholder set if you want to fine-tune your shoulder bump with the body die.
What's the difference between this set and a standard full length die set?
This is a competition-grade neck sizing setup. The bushing neck die lets you control neck tension precisely by swapping bushings, and both the sizer and seater use micrometer heads for repeatable settings. The sliding sleeve design captures and centers the case for very low runout, which standard sets don't offer. The included body die covers full length body sizing and shoulder bump when you need it.
Can I use the competition seater for compressed powder loads?
The competition seating die is not recommended for compressed loads. It's built for precision seating with most standard bullet designs. If you're running heavily compressed charges, a standard seater is the better tool for that job.



Reviews
There are no reviews yet.