0
0

Redding Type S-Elite Bushing Die Set 6.5×55 Swedish Mauser 3-Die

UPC: 611760601323

$276.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you load for the 6.5×55 Swedish Mauser and you want real control over how your brass is sized, the Redding Type S-Elite set is about as complete as it gets short of custom tooling. This is a three-die package built around Redding's interchangeable bushing system, which lets you dial neck diameter and tension in .001 inch steps instead of being stuck with whatever a standard die gives you. It's the set a lot of precision reloaders reach for when they're chasing tight groups out of their 6.5 Swede, whether that's a vintage military action or a modern bolt gun.

What's Inside the 6.5×55 Type S-Elite Die Set

You get three dies that cover every base. The Type S Bushing Full Length Sizing Die handles full resizing while still letting you control the neck through the bushing. The Type S Bushing Neck Sizing Die is there for when you're only working the neck on fire-formed brass. And rounding it out is the Redding Competition Seating Die, a micrometer-adjustable straight-line seater with a sliding sleeve that supports the case and bullet in alignment before seating happens. The seating stem is ground to match bullet diameter for consistent contact.

How the Bushing System Pays Off

The free-floating bushings self-center on the case neck, which cuts down on runout and keeps your loaded rounds concentric. Because you pick the exact bushing, you avoid overworking the brass, so case necks last longer and tension stays repeatable round to round. Bushings come in hardened steel or titanium nitride coated for extra lubricity. The adjustable decapping rod even lets you size just part of the neck length if that's how you like to work.

Fitting the Right Bushing for Your 6.5 Swede Brass

One thing worth knowing up front: bushings and the shellholder are sold separately on this set, same as the rest of the Type S line. The 6.5×55 uses a #7 shellholder, and the bushing range for this cartridge runs roughly .286 to .294. Measure your loaded neck diameter, subtract about .001, and you've got your starting bushing. It's a small extra step that gives you tuning room most standard die sets just don't offer.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 60132
  • UPC: 611760601323
  • Cartridge: 6.5x55mm Swedish Mauser
  • Die Set Type: Type S-Elite Bushing (3-Die)
  • Dies Included: Type S Bushing Full Length Sizing, Type S Bushing Neck Sizing, Competition Seating
  • Seating Die: Micrometer adjustable with sliding sleeve
  • Bullet Diameter: 0.264 in
  • Shellholder Size: #7 (sold separately)
  • Bushing Range: 0.286 in to 0.294 in (bushings sold separately)
  • Bushing Adjustment: Interchangeable in .001 in increments
  • Thread: 7/8-14
  • Country of Origin: United States

What’s Included

  • One Type S Bushing Full Length Sizing Die with decapping rod, standard sizing button, and decapping pin retainer
  • One Type S Bushing Neck Sizing Die
  • One Redding Competition Seating Die with sliding sleeve and micrometer adjusting head

Frequently Asked Questions

Do bushings come with the 6.5×55 Type S-Elite die set?

No, the bushings are sold separately so you can pick the exact diameter for your brass and desired neck tension. For the 6.5×55 Swede the usable bushing range runs about .286 to .294. Measure your loaded round's neck diameter and subtract roughly .001 to find your starting bushing.

What shellholder do I need for this set?

The 6.5×55 Swedish uses a #7 shellholder, and it is not included with the die set. You'll want to pick one up separately if you don't already have it in your kit.

What's the difference between this Elite set and the Type S Match set?

The Type S-Elite set is a three-die package that adds a Type S Bushing Neck Sizing Die on top of the bushing full-length sizer and Competition Seating Die. That gives you the option to full-length size or neck-size only without buying a separate die. The Match set typically comes with just the full-length bushing die and the seating die.

Can the full-length sizing die be used as a body die?

Yes. By removing the bushing and the internal parts, the full-length bushing sizing die can function as a body die to bump the shoulder and size the body without touching the neck. It's a handy bit of versatility if you turn or sort necks separately.

Additional information

UPC

611760601323

Manufacturer

Manufacturer Part Number

60132

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Elite Bushing Die Set 6.5×55 Swedish Mauser 3-Die”