Description
If you handload for the 6.5×55 Swedish or the 6.5×55 SKAN and you're chasing concentric, repeatable ammo, the Forster Bench Rest Seater Die is one of the best seating tools you can put on your press. Forster built the first die of this kind, and the design has stood the test of time for a reason. Instead of referencing off the case rim like a lot of standard seaters, this one uses a caliber-specific sliding chamber that captures the full outside diameter of the sized case along with the bullet and seating stem, keeping everything lined up through the entire seating stroke.
What Makes the Bench Rest Seater Die Different
The heart of this die is a sliding die chamber with a concentric bullet channel cut just slightly larger than bullet diameter. That snug fit forces straight-line, co-axial seating, which is what keeps runout low and bullets seated true. It's a non-crimping design, so you get accuracy and consistency without the variables that crimping can introduce. Reloaders running this style of die commonly report runout in the half-thousandth to one-and-a-half-thousandth range, which is excellent for a standard seater.
Seating Stem and Lock Ring Built for Precision
The hand-polished bullet seating stem contacts the bullet on the ogive rather than the tip, so it works beautifully with modern ballistic-tip and VLD-style projectiles without marking the nose. Forster has refined the stem over the years to handle today's high-BC bullets. The die also ships with the Cross Bolt Die Lock Ring, which clamps evenly around the full circumference of the die body rather than biting into the threads with a single set screw. The result is a cleaner thread mating, no canting, and a lock ring that holds your setting better than a rubber O-ring style. A 7/64" hex key is all you need to snug it down.
This die threads into most standard 7/8"-14 presses and works great in a Forster Co-Ax, where no shellholder is needed. It's made in the USA and covers both the 6.5×55 Swedish Mauser and 6.5×55 SKAN chamberings from a single die.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 006071
- UPC: 757253001307
- Cartridge: 6.5x55mm Swedish Mauser / 6.5×55 SKAN
- Die Type: Bench Rest Bullet Seating Die (non-micrometer)
- Seating Style: Straight-line (co-axial), non-crimping
- Lock Ring: Cross Bolt Die Lock Ring included
- Thread: 7/8"-14
- Material: Steel
- Seating Stem: Hand-polished, ogive contact, VLD compatible
- Country of Origin: Made in USA
What’s Included
- One Forster Bench Rest Seater Die
- One hand-polished bullet seating stem
- Cross Bolt Die Lock Ring
- Complete instructions
- Die box
Frequently Asked Questions
Does the 6.5×55 Bench Rest Seater Die fit both 6.5×55 Swedish and 6.5×55 SKAN?
Yes. This die is set up for both the 6.5×55 Swedish Mauser and the 6.5×55 SKAN, so you can load for either chambering with the same tool. The caliber-specific sliding chamber is cut to handle the 6.5×55 case.
Do I need a shellholder to use this seater die?
A shellholder is sold separately and isn't included with the die. You'll need the correct shellholder for the 6.5×55 case if you're running a standard press. If you're using a Forster Co-Ax press, no shellholder is required thanks to its jaw system.
Is this the micrometer version of the Forster seater die?
No, this is the standard Bench Rest Seater Die, not the Ultra Micrometer model. It uses a threaded bullet seating stem adjusted by hand rather than a micrometer head. If you want click adjustments in .001" increments, that's the separate Ultra Micrometer version, though many reloaders get excellent, repeatable results with this standard die.
Will this die work with VLD and high-BC bullets?
It will. The hand-polished seating stem is designed with enough clearance to contact the bullet on the ogive instead of the tip, which makes it a good match for modern ballistic-tip and VLD-style projectiles. That contact point also helps avoid marking or deforming the bullet nose.




Reviews
There are no reviews yet.