0
0

Redding Type S Bushing Full Length Die 6.5x47mm Lapua 77479

UPC: 611760774799

$90.99

Out of stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Type S Bushing Full Length Die for 6.5x47mm Lapua gives you one of the most flexible sizing tools a precision reloader can own. In a single pass it full-length sizes the case body, bumps the shoulder, and sizes the neck using an interchangeable bushing that you select to match your brass and the neck tension you want. Because bushings come in .001 inch increments, you get fine control over bullet grip instead of being stuck with whatever a standard die hands you. For a cartridge like the 6.5×47 Lapua that lives in the match and long-range world, that level of control makes a real difference on paper.

What Sets the 6.5×47 Lapua Type S Bushing Die Apart

The magic here is the bushing itself. Rather than sizing the neck down hard and then dragging it back open over an expander, the bushing only squeezes the outside of the neck to the dimension you choose. The bushing floats so it can self-center on the case neck, which keeps concentricity tight and runout low. A lot of folks who shoot this cartridge are already sorting brass and chasing single-digit ES, and this die fits right into that kind of workflow.

Dialing In Your 6.5×47 Lapua Loads

The die ships with a standard size button and a decapping pin retainer, plus an adjustable decapping rod that lets you position the bushing to size only part of the neck when you want to. Swap the retainer in place of the button if you prefer to skip the expander and size purely off the bushing. Strip out the bushing and internal parts and the same die works as a body die, which is handy when you want to bump shoulders without touching the necks.

A Few Things Worth Knowing

Bushings are sold separately so you can match them to your exact brass and neck thickness. For reference, this cartridge uses .264 bullets and a #1 shellholder. Redding dies run the industry-standard 7/8-14 thread, so this one drops into any standard reloading press without fuss. Built from quality steel and finished to Redding's usual standards, it's the kind of die that earns a permanent spot on the bench.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 77479
  • UPC: 611760774799
  • Cartridge: 6.5x47mm Lapua
  • Die Type: Type S Bushing Full Length Sizing Die
  • Bushing Increments: .001 inch
  • Bushings Included: No, sold separately
  • Bullet Diameter: .264 inch
  • Shellholder: #1 (sold separately)
  • Thread: 7/8-14 industry standard
  • Material: Steel
  • Doubles As: Body die when bushing and internals removed

What’s Included

  • One Redding Type S Bushing Full Length Sizing Die
  • Adjustable decapping rod
  • Standard size button
  • Decapping pin retainer
  • Die box
  • Instructions

Frequently Asked Questions

Do bushings come with the 6.5×47 Lapua Type S die?

No, this die ships without bushings so you can match them to your specific brass and the neck tension you're after. Redding bushings come in .001 inch increments, and for 6.5×47 Lapua most reloaders land somewhere in the .281 to .289 range depending on wall thickness. A common starting point is measuring a loaded round and choosing a bushing .003 to .005 under that diameter.

Can the Type S bushing full die be used as a body die?

Yes. Remove the bushing and the internal parts and the die functions as a body die, letting you full-length size the case body and bump the shoulder without sizing the necks. That versatility is one of the nicer perks of the Type S design.

What does the adjustable decapping rod do on this die?

The adjustable decapping rod lets you position the bushing so you can size only part of the neck length when you want to leave a portion unsized. It also carries the decapping pin to knock out spent primers during sizing. You can swap the included decapping pin retainer in place of the size button if you'd rather size off the bushing alone.

Will this Redding die fit a standard reloading press?

Yes. It uses the industry-standard 7/8-14 die thread, so it threads into any standard single-stage or progressive press. You'll want a #1 shellholder for the 6.5×47 Lapua, which is sold separately.

Additional information

UPC

611760774799

Manufacturer

Manufacturer Part Number

77479

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Full Length Die 6.5x47mm Lapua 77479”