0
0

Bore Tech 6.5mm Proof-Positive Rifle Jag 8-32 Brass-Free

UPC: 667739980395

$11.99

53 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Cleaning a 6.5mm bore with a copper-removing solvent should give you a straight answer, but a traditional brass jag muddies it. Brass is more than 60% copper, so when your solvent goes to work it starts eating the jag too, staining your patches blue even after the bore is spotless. The Bore Tech 6.5mm Proof-Positive Rifle Jag solves that by ditching brass entirely in favor of a proprietary alloy with a secondary treatment that seals it against harsh chemicals. When a patch comes out blue, you know it's copper from the barrel and not from your gear.

What Sets the Proof-Positive 6.5mm Jag Apart

The alloy is engineered to feel as soft as brass so it stays completely barrel safe, but it carries much higher tensile strength to keep it from bending or snapping when you're driving a tight patch down a fouled bore. The business end uses a dual set of four contact rings for solid patch contact and thorough scrubbing. The lead ring on each set is rounded to help the jag self-center in the bore, while the three squared rings behind it grip the patch so it won't slip. The relief gap between the two ring sets doubles as a small solvent reservoir, holding fresh solvent and releasing it as the second set of rings passes through.

Sized Right for the .264 Caliber Bore

This jag is cut specifically for 6.5mm / .264 caliber and threads onto standard 8-32 cleaning rods, so it drops into most quality rod setups. The length is matched to the caliber and correct patch size, which keeps patches from bunching or jamming at the muzzle. Run it on a Bore Tech Bore Stix rod and the reverse taper at the rear creates a smooth, edge-free handoff between jag and rod, lifting the rod off the barrel and helping protect the crown on the pull-through. It's a small piece of kit that quietly makes your whole cleaning routine more accurate and less wasteful on patches and solvent.

Key Specifications

  • Manufacturer: Bore Tech
  • Manufacturer Part Number: BTAJ-65-00
  • UPC: 667739980395
  • Caliber: 6.5mm / .264 Caliber
  • Thread: 8-32
  • Material: Proprietary brass-free alloy with sealing treatment
  • Contact Rings: Dual set of 4 contact rings
  • Patch Attachment: Pierce style
  • Rear Design: Reverse taper for crown protection
  • Country of Origin: Made in USA

What’s Included

  • 1 Bore Tech 6.5mm Proof-Positive Rifle Jag (8-32 thread)

Frequently Asked Questions

Why does the Proof-Positive Jag stop false copper readings?

Standard brass jags are over 60% copper, so aggressive copper-removing solvents dissolve a little of the jag itself and stain your patches blue even when the bore is clean. This Bore Tech jag uses a brass-free alloy with a sealing treatment, so any blue you see comes from actual fouling in the barrel. That gives you a reliable read on when the bore is genuinely copper free.

Will this jag fit my cleaning rod?

It uses a standard 8-32 male thread, which is the common size for 6.5mm and most centerfire rifle rods, so it fits the majority of quality cleaning rods. It pairs especially well with Bore Tech Bore Stix rods, where the reverse taper at the rear creates a smooth transition between the jag and rod. Just double-check that your rod is threaded 8-32 before ordering.

Is the alloy safe for my barrel?

Yes. The alloy is designed to be as soft as brass, so it stays gentle on the bore and the rounded lead ring helps it self-center to avoid contact damage. On the pull-through, the reverse taper lifts the rod off the barrel to help protect the crown.

What caliber and patch size is this 6.5mm jag meant for?

This jag is machined specifically for 6.5mm / .264 caliber bores. The length is matched to the caliber and the correct patch size, which keeps patches from bunching or jamming at the tip. Use it with patches sized for 6.5mm for the best fit and cleaning contact.

Additional information

UPC

667739980395

Manufacturer

Manufacturer Part Number

BTAJ-65-00

Caliber/Gauge

264 Caliber

Reviews

There are no reviews yet.

Be the first to review “Bore Tech 6.5mm Proof-Positive Rifle Jag 8-32 Brass-Free”