0
0

Redding Type S-Match Bushing Full Die Set – 6.5 Grendel (36478)

UPC: 611760364785

$249.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Type S-Match Bushing Full Die Set in 6.5 Grendel is where precision reloading really starts to open up. This two-die set combines a Type S Bushing Full-Length Sizing Die with Redding's Competition Seating Die, two tools that let you dial in your loads with a level of control standard die sets just can't match. If you're loading for an AR platform or a bolt gun chambered in 6.5 Grendel and want to squeeze every bit of accuracy out of your brass, this is the set that gets you there.

What the Bushing System Does for Your 6.5 Grendel Loads

The heart of this set is the interchangeable bushing design in the full-length sizing die. Instead of one fixed neck diameter, you pick a bushing in .001" increments to set exactly how much neck tension you want. The bushing floats and self-centers on the case neck, which improves concentricity and keeps runout down. The adjustable decapping rod even lets you control how far down the neck gets sized, so partial neck sizing is on the table when you want it. Pull the bushing and internals and the die doubles as a body die, which is a handy bonus. Bushings run from .283 to .291 for the 6.5 Grendel, and they're sold separately so you can match your exact brass and bullet combo.

The Competition Seating Die That Comes With This Set

Redding's Competition Seating Die has earned its reputation as one of the finest straight-line seaters out there. A sliding sleeve captures the case and aligns it before the bullet ever starts into the neck, which keeps seating consistent round after round. The micrometer head is calibrated in .001" increments and adjusts without clicks, so dialing in seating depth is fast and repeatable. The seating stem is precision ground to match bullet diameter for clean, straight seating.

Keep in mind the bushings and shellholder are sold separately. The 6.5 Grendel uses a #12 standard shellholder. Redding has been building dies in the USA since 1946, and this set carries that same machined-to-tight-tolerance pedigree competitive shooters have trusted for decades.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 36478
  • UPC: 611760364785
  • Caliber: 6.5 Grendel
  • Die Set Type: Type S-Match Bushing Full Length
  • Number of Dies: 2
  • Dies Included: Type S Bushing Full-Length Sizing Die, Competition Seating Die
  • Neck Tension Control: Interchangeable bushings in .001" increments
  • Bushing Range: 0.283" to 0.291"
  • Seating Adjustment: Micrometer head, .001" increments
  • Bullet Diameter: 0.264"
  • Standard Shellholder: #12 (sold separately)
  • Thread: 7/8"-14
  • Country of Origin: United States

What’s Included

  • One Type S Bushing Full-Length Sizing Die with decapping rod, standard sizing button, and decapping pin retainer
  • One Redding Competition Bullet Seating Die with sliding sleeve and micrometer adjusting head
  • Die storage box
  • Complete instructions

Frequently Asked Questions

Do I need to buy bushings separately for this 6.5 Grendel die set?

Yes. The bushings are sold separately so you can match the exact neck tension you want for your brass and bullet combination. For the 6.5 Grendel, bushings range from .283 to .291 in .001" increments. To find your size, measure your loaded case neck diameter and subtract about .001" to .002".

Is a shellholder included with the Redding Type S-Match set?

No, the shellholder is not included and needs to be purchased separately. The 6.5 Grendel uses a Redding #12 standard shellholder. This lets you build your setup around the press and gear you already run.

Can the sizing die in this set be used as a body die?

It can. By removing the bushing and the internal parts of the die, the Type S Bushing Full-Length Sizing Die functions as a body die. That versatility makes it handy if you want to bump shoulders without touching the neck.

What makes this different from a standard 6.5 Grendel full length die set?

The big differences are neck tension control and seating precision. The bushing system lets you fine-tune how much the neck gets sized rather than relying on a fixed expander, and the Competition Seating Die uses a sliding sleeve and micrometer head for highly repeatable seating depth. It's a step up aimed at handloaders chasing consistency and tight groups.

Additional information

UPC

611760364785

Manufacturer

Manufacturer Part Number

36478

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Match Bushing Full Die Set – 6.5 Grendel (36478)”

Related Products